ABB · TU810V1
ABB TU810V1 Compact Module Termination Unit for S800 I/O
ABB TU810V1 compact 16-channel, 50 V module termination unit for
S800 I/O field termination, ModuleBus connection and DIN-rail
mounting.
TypeCompact module termination unit
SystemABB S800 I/O / System 800xA
Focus2 × 8 signal terminals
BrandABB
TU810V1 availability, lead time and order review
Send RFQProduct Introduction
TU810V1 is a compact S800 I/O module termination unit that provides
field-signal terminals and the mechanical/electrical connection
between a supported I/O module and ModuleBus.
Engineering note: Match the I/O module and its approved MTU in the ABB product
catalog before moving field wiring. Terminal count alone is not a
compatibility check.
Technical Specifications
Select a category to view its specifications. All categories are
closed by default.
Identification & functionView 5 specificationsHide specifications⌄
| ABB article number | 3BSE013230R1 |
|---|
| Product type | Compact Module Termination Unit (MTU) |
|---|
| System | ABB S800 I/O |
|---|
| Mounting | DIN rail |
|---|
| Primary function | Field termination and ModuleBus connection |
|---|
Terminal & electrical dataView 5 specificationsHide specifications⌄
| I/O channels | 16 |
|---|
| Signal terminals | 2 × 8 |
|---|
| Rated isolation | 50 V |
|---|
| ModuleBus connection | Provided through the MTU |
|---|
| Field connection format | Direct terminal landing on the compact MTU |
|---|
Compatibility & Replacement
Confirmed system fit. ABB identifies TU810V1 as a compact MTU in the S800 I/O family.
Confirmed module examples. ABB product catalogs list TU810 among the permitted termination
units for DI810, DI811, DI830 and DI831. Verify the exact I/O
module revision and project hardware definition before
installation.
Applications & Fault Scenarios
01Field wiring termination
Provides a compact landing point for 16 field signals beneath a
supported S800 I/O module.
02Cabinet rebuilds and outage work
Used when maintenance teams must preserve field-wire organization
while restoring an S800 I/O position.
03I/O module will not seat correctly
Stop and compare the installed I/O type, MTU keying and part
number; forcing a mismatched assembly can extend the outage.
04Channel remains inactive
Trace the field wire at the assigned terminal, check terminal
tightness and compare the channel assignment with the engineering
drawing.
05Repeated intermittent signals
Inspect the terminal landing, ModuleBus seating and mechanical
retention before replacing the active I/O module.
AMIKON SUPPORTIndependent spare-parts support
Amikon can review the exact part number, installed system,
quantity, destination and required date before quotation.
Pre-outage checkpoints
- Record the installed I/O module type and revision.
- Photograph and label all 2 × 8 field terminals.
- Confirm the cabinet circuit is within the 50 V rated-isolation
application.
- Verify DIN-rail seating and ModuleBus continuity after work.
Amikon Supply & Service
Independent multi-brand support for maintenance, outage and
legacy-system requirements.
Order reviewPart number, quantity, destination, required date and system model
checked.
Inspection & testingLabel, condition and serial checks; testing when agreed.
Packing & dispatchProtective export packing and delivery coordination.
DOA, returns, warranty & supportAfter-sales review under the quoted return and warranty terms.
Request for Quotation
- Part Number
- Quantity
- Destination
- Required Date
- Machine / System Model
Multi-brand Spare Parts Also Requested
- OP-88625
- 5610B1802
- 5203-0126
- V420AM2525CL060
- A-751-116-9B
- TLS1CARD
- F-2500-284-0550
- PLN-10X1.5
- DW-AS-501-04
- SNAP-AITM
- 09200105425
- T18-301
- AC102-2C/010M-Z
- MWS0084XB VP15TF
- MVS0680X08S080 DP1020
- 7001A5TYSULP4
- 01-017020-302
- PZ-V32
- GRIP 6008Y IC808
- CCGT431FN-AR V12K
- 6NIC656
- WAGO 750-479
- P4840P 8R E67 WSP45
- P4840C 8R E77 WNN15
- DNGG110404MMN3 WN10
- ADHT1606PER G88 WXN15
- 6N IC656
- NPV3-1O-05-24
- ADMT160630L-F56 WSP45S
- RDMW2006MoT-A27 WKP35S
These models are listed only as independent sourcing references.
They are not substitutes for TU810V1. Compatibility, configuration
and stock must be confirmed separately for each item.
TU810V1 FAQ
Can ABB TU810V1 be selected by terminal count or appearance alone?
No. Match the full TU810V1 model and ABB article identification,
then confirm the installed S800 I/O module and wiring requirement
against ABB documentation before ordering.
Which installation details should I send with an ABB TU810V1
enquiry?
Send the existing label or nameplate photo, installed I/O module,
machine or system model, quantity, destination and required date.
Clear wiring photos can help prevent a wrong termination-unit
order.
Can current stock, condition and lead time for ABB TU810V1 be
confirmed from this page?
No. Stock, condition, inspection scope and lead time change by
offer and must be confirmed in the live quotation for ABB TU810V1.
What pre-shipment evidence can I request for ABB TU810V1?
Request clear label, condition and serial-number photos plus the
agreed inspection or testing record for ABB TU810V1 before
dispatch.
How should I submit an urgent shutdown requirement for ABB TU810V1?
Send the exact part number, quantity, destination, required date,
machine or system model and failure context. Priority routing
starts after the ABB TU810V1 identity is confirmed.
What DOA, return and warranty terms apply to ABB TU810V1?
They are defined in the quotation. If ABB TU810V1 arrives DOA or
does not match the purchase order, report the serial number, label,
packaging and fault evidence promptly for after-sales review.
