SME-4120 is aSmart, quick, confined space and high pressure automatic water
spray screen developing machine.
SME-4120 is used to clean screen after film exposure or laser curving in
screen producing process.
Front and back side 2 water spray rods clean the front and rear
side of the screen to make the printing graph clear.
Water spray back side can be turn on an shut off for normal screen
and water fillm screen.
Spray water pressure,spray time and spray rods moving speed can be
edited on PLC programme as needed. Water can be discharge or
recyclly used.
SME-4120 advantages:
1. Low water cost.
2. Very good develop and strip quality.
3. One key easy operation.
4. Moving range can be set according to screen size.
5. Low water level protection function.
6. Water auto add function.
7. Spray speed and pressure easy edit.
8. Sus304 staninless steel material, acid and alkalic proof.
9. Obeservation window.
10. Seal cabinet,no water or mist leak out, keep workshop dry and
clean.
Machine Features:
1.High quality electrical pump. High pressure water spray and
recycle filtering function.
2.Totally SUS 304 structure, Strong Acid and Alkali corrosion
resistance, 10 years lifespan.
3.One-key operation, developing/Stripping and dry process complete
automatically according to pre-setting procedure.
4.Standard equipped water level control mechanism, automatically
add water when water is not enough..
5.Standard equipped water less alarm and protection system, shut
off the machine automatically to protect the pump.
6.Completely closed spray developing process, makes the ground of
the workshop clean and day.
7.Super well-known electrical and pneumatic parts, perfect design,
strictly produce process to ensure stability and high quality of
the machine.
8.It also can be used as auto striping machine after adjusting the
water jet pressure and time.
Machine Spec:
| Item | SME-4120 |
| screen size | L1200 x W1200 x H40(mm) |
| water tank capacity | 120L |
| developing and stripping time | 1~3min |
| Air blow dry time | 1~2min |
| Air rate | 800~1000L/min |
| Air pressure | 0.5~0.7Mpa |
| air vent | Φ125 × H30 (mm) |
| Power supply | AC380V,50HZ,5KW |
| Machine size | L1950xW1550xH2200mm |
| Weight | 880kg |
Customer Questions and Answers:
Q1: Can this machine develop fine mesh screen?
A1: Yes, the water spray pressure can be adjusted on programme.
Q2: Can this machine develop thick screen?
A2: Yes, the water spray pressure and time can be adjusted, thick
screen need 4~5min.
Q3: Can this machine develop 2 small size screen?
A3: Yes, screen size less than 600*600mm, it can develop 2 screens
at the same time.
Machine pictures:
