Steel vacuum box,Low-energy,Desktop single table router machine (
Model:YSATM-3L)
Hot factor for Model:YSATM-3L
1. Easier to maintanance and operation
2. Lower bending stress,no vibration
3. Steel vacuum box to suck dust smoothly and low-energy.
4. Different milling cutter can substrate easier the edge PCB and circuit PCB.
Features:
1. Desktop single table router machine, the speed of up to 100mm /
s, positioning speed 500mm / s.
2. High-quality shaft system allows the system to quickly increase
and decrease, reduce the same period of time, improve productivity,
while maintaining high accuracy.
3. Use high-quality hardware to ensure high rigidity and high
performance.
4. All leadscrews are covered to prevent dust and dirt from
entering, improving the life and performance of the shaft.
5. To avoid the artificial flap caused by the crack and parts
damage and other issues.
6. Avoid the use of punch or fold, the mechanical stress generated
by the problem.
7. Suitable for cutting of finished arc and wire.
8. Suitable for small multi-pull cutting, such as mobile phone
substrate, PDA, PC interface card.
Specification parameters:
| PCB Size(Max.) | 250×350mm |
| PCB Thickness | 0.4-2.0mm |
| PCB Material(Resin) | FR4, CEM1, CEM3 etc. |
| Router bit diameter | φ0.8, φ1.0, φ1.2, φ1.5, φ2.0, φ3.0 |
| Cutting Speed(Max.) | 50mm/sec |
| Moving Speed(Max.) | 500mm/sec |
| Repeat Accuracy | ±0.02mm |
| Z Axis Stroke(Max.) | 35mm |
| Spindle Spec. | 25,000-50,000rpm |
| X,Y,Z Axes Control | Pulse Motor(Servo Control) |
| Power | Power Voltage | φ1 AC100V ±5% 50/60Hz |
| Consumption | Approx.1.2KVA |
| Pneumatic | Pressure | Nonuse |
| Consumption | Nonuse |
| Weight for Main Unit | Appprox.70kg |
| Outer Dimension(mm) | W 664 × D 715 × H 602 mm |
| Drive system motor | Stepper motor |
| Spindle speed | 60000r / m |
| Cutting performance | 500mm / s |
| Drive system repeatability | ± 0.01mm |
| Cutting speed: | Maximum 100mm / s depends on the circuit board material and cutting
quality. |
| Resolution: | ± 0.01mm |
| Configuration: | X, Y, Z : 300 X 300 X 100mm； |
| Repeat cutting accuracy: | <0.05mm, the outline of the line and curve |
| Board positioning: | Special or standard fixture |
| loading and unloading methods: | Manual way |
| Board thickness: | 0.4mm-4mm |
| Safety settings: | Machine emergency stop switch, spindle emergency stop switch,
spindle motor overheat and servo motor overload detection. |
| Spindle motor Power: | 0.3 kW |
| Cooling method: | Air-cooled |
| Machine size: | 660 * 520 * 700mm |
| Weight: | 73KG |
| CCD and monitor optional | CCD and monitor optional |
| Programming: | keypad input teaching |
| Data storage capacity: | 100-200 group of documents |
| Control: | Microcomputer control, online programming, CAD file import |
| Transmission: | Rail + screw (Taiwan) |
| Vacuum cleaner: | 1.5KW, 380V; Size: 680 * 400* 900mm ;24 hours continuous work |
| Vacuum way: | Under the vacuum |
| Safety measures (option): | Equipped with protective cover |
Demo pictures:
