Description of VA-500 Gas and Air Flow Meter CS mass flow meter Thermal mass flow
sensor for compressed air and gases
Recording and reducing energy costs and CO2 emissions while
increasing the sustainability of any compressed air system. With
ourVA500 it is possible to monitor your consumption and analyze
your leakage flows with just one measuring device. Due to its
design,it is also ideal for mobile measurements.
Specification of VA-500 Gas and Air Flow Meter CS mass flow meter Thermal mass
flow sensor for compressed air and gases
| 1 | RS 485 interface, Modbus-RTU as a standard |
| 2 | Option integrated display for m³/h and m³ |
| 3 | Usable from 1/2“ to 12“ (DN 300) |
| 4 | Easy installation under pressure |
| 5 | 4...20 mA analogue output for m³/h resp. m³/min |
| 6 | Pulse output for m³ |
| 7 | Inner diameter adjustable via keypad |
| 8 | Consumption counter resettable |
| 9 | Adjustable values at the display of the flow sensor: Reference
conditions, °C and mbar, 4...20 mA scaling, pulse weight |
Features of VA-500 Gas and Air Flow Meter CS mass flow meter Thermal mass
flow sensor for compressed air and gases
* Measurement of mass flow direct output of standard volume flow
* Highly accurate at small as well as higher flow rates
* Pressure and temperature compensated by the thermal mass flow
principle
* Quick and easy installation via a ½" ball valve
* No moving parts, thus low maintenance
* Vanishingly low pressure drop due to vanishingly low blockage of
the diameter
* Can be used for compressed air and non-corrosive gases such as
nitrogen, oxygen, argon, helium, etc.
Details Images of VA-500 Gas and Air Flow Meter CS mass flow meter Thermal mass
flow sensor for compressed air and gases
FAQ
Q: How long will you reply me?
A: We will contact you as soon as possible but within 12 hours.
Q: Can I get some samples?
A: Yes, Sample order is available for quality check and market
test. But you have to pay the express cost.
Q: How soon can you arrange your production?
A: Once getting your product confirmation and receiving the
prepayment, the production will be started immediately.
Q: What's delivery time?
A: It usually takes about 3-5 working days for small order and
10-15 days for big order.
Q: How do you control your quality ?
A: Three inspection steps(of original, production, and finished
goods) + good warranty service(1 year free to change a new one
without any human damage factors).
Q: What certificates do you have ?
A: ISO9000, CE, Explosion-proof certification, RoHs ready. And
before the delievry of goods, quality and safety inspection
certification issued by third parts also can be offered.
Q: Could I visit your factory?
A: Very welcome! Fly to Xian Yang air port. It was a big pleasure
for us.
Q: What's your warranty terms?
A: We offer 12 months warranty time.
Q: Can you provide OEM & Customized service?
A: Yes, OEM and ODM are both available, we have the professional
R&D dept which can provide professional solutions for you.
