Industrial
Advantage:
◆ Upper computer programming software compatible with Works 2/GX
Developer8.86 (supports Ladder diagram and SFC language, does not
support structured programming/labels).
◆ Military level 32 bit CPU adopted, which is faster and more
adapted to industrial environment of high electromagnetic
interference.
◆ Clock supported, rechargeable battery adopted.
◆ Support Mitsubishi programming port protocol/Modbus protocol/Rs
protocol/BD board protocol,
PLC communication with each other and other devices is easily
achieved.
◆ High speed counter.regularly single phase 6 channels 60KHz/ AB(Z)
Phase 2 channels 60KHz + AB phase 1 channel 10KHz.
◆ Support multiple types analog individually or mixed ones for
analog output and input.
◆ Convenient for wiring, adopting 3.81mm pluggable terminals.
◆ Easy installation. DIN-Rail (35mm width) installation and fixed
hole installation.Flexible, can be customized accordingly.
◆ PLC Software is compatible to Mitsubishi, HMI use Coolmay
programming software.
Parameter:
Display | Dimension | 134*102*32mm |
Resolution | 480*272 pixels |
Type | 4.3” TFT |
Features | Support interrupt, linear arc interpolation, PID auto-tuning. 32K
program capacity, 32K retentive register |
Memory | RAM | 128MB |
ROM | 128MB |
CPU | Dual-core 1GHz |
I/O | DI/DO | 12DI/12DO |
Input: Passive NPN, public terminal isolated Transistor output: Low level NPN, COM connect to negative; Relay
output: Normally open dry contact |
DO type and load | Relay MR/MOS tube, MOS tube: 2A/point, 4A/4 point COM, 5A/12 point COM; MR: 2A/point, 5A/12 point COM. |
Analog I/O (optional) | Max 4AI/2AO |
AI type (optional) | Type E/E_/K/K_/S/S_/T/T_/J/J_ thermocouple/ PT100/ PT1000/ NTC10K/
NTC50K/ NTC100K/ 0~10V/ 0~5V/ 0~20mA/ 4~20mA/ mixed |
AO type (optional) | 0~10V /0~5V/ 0~20mA/ 4~20mA/ mixed |
High-speed function | High-speed counting | 6 channels single-phase 60KHz, or 2 channels AB (Z) phase 60KHz + 1
channel AB phase 10KHz |
High-speed pulse | 8 channels, Y0-Y3 is 100KHz, Y4-Y7 is 10KHz High-speed counting + high-speed pulse < 480KHz |
Connection | HMI | 1 HMI download port |
1 RS232 port |
PLC | 1 Mini type B USB port, 1 RS232 port (Program port,also can be used
as COM port) |
1 RS485 or 2 RS485 COM ports (one is changed from the default RS232
port) |
Software | HMI | CoolMay vcool |
PLC | Compatible with Mitsubishi GX Developer8.86 and GX WORKS 2 |
PLC Programming notice
The PLC is compatible with GX 8.86/Works 2 and below. If you use
other versions of the software, incompatibility may occur.
When the PLC program is downloaded, there is a prompt error: Cannot
specify the com port,
GX 8.86 software: Online - Transfer settings change com port;
Works 2: All targets - Change the com port in all connected
targets;
If communication error occurs, cable is abnormal If prompted,
remove it by powering off, detecting the cable, detecting whether
the power is normal, or replacing the computer.
In the Works 2 software version, choose the figure : (Note: the
label is forbidden)
Introduction of each interface and indicator:
POWER: Power indicator, connected to the power light
RUN: PLC running status indicator. This light is on when the PLC is
running.
COM: touch screen and PLC communication status indicator, when the
two communicate, the light is on
Power terminal: The positive and negative terminals of the DC24V
switching power supply are respectively connected to the DC24V and
0V of the power supply terminal.
PLC programming port: two PLC programming ports (MiniB type usb
port / RS232), PLC program can be downloaded through 232
programming line or USB cable download
Touch screen programming port: download touch screen configuration
program
USB interface: mainly can be directly inserted into the U disk of
the file system FAT 32, can also be inserted into the mouse.
