520mm Cleaning Width: Provides productive floor coverage while retaining a compact
machine footprint.
Up to 1,200m²/h Rated Efficiency: Designed for routine cleaning of small and medium commercial
areas.
Dual Brush Motors: Two 160W brush motors provide a combined rated brush power of
320W.
1.5–2 Hours Working Time: Supports scheduled cleaning without a continuous cable connection.
Compact Configuration: The 518 × 410 × 1,208mm body is suitable for storage and movement
through restricted spaces.
The T1 is a compact 24V walk-behind floor scrubber with a 520mm
cleaning path, dual 160W brush motors and a rated cleaning
efficiency of up to 1,200m²/h.
T1 Procurement FAQ
Practical answers to the questions purchasing engineers commonly
ask when evaluating the T1 for commercial floor-cleaning projects.
1. What size facility is the T1 suitable for?
The T1 is best suited to small and medium commercial areas that
require a compact walk-behind machine. It has a 520mm cleaning width and a rated efficiency of up to
1,200m²/h. Typical applications can include shops, offices,
restaurants, schools, healthcare facilities and restricted
warehouse areas, subject to the floor condition.
2. How much floor area can the T1 theoretically clean per charge?
The theoretical coverage is approximately 1,800–2,400m² per charge. This estimate is calculated from the rated efficiency of 1,200m²/h
and the specified working time of 1.5–2 hours. Actual coverage will
be lower when the operator makes frequent turns, refills the tank
or cleans heavily soiled floors.
3. Is the 520mm cleaning width suitable for narrow commercial
spaces?
Yes, the 520mm cleaning path balances productivity with
maneuverability. The machine body measures 518mm wide, allowing it to work in
comparatively restricted spaces. Buyers should still measure
doorways, elevators, aisles and storage entrances before confirming
an order.
4. What brush power does the T1 provide?
The T1 uses two 160W brush motors, providing 320W of combined rated
brush power. The dual-motor configuration supports consistent mechanical
scrubbing across the 520mm cleaning path. Brush type and pad
selection should be matched to the floor material and soil level.
5. How often will the T1 water tanks need to be serviced?
The T1 uses a 6L fresh-water tank and a 9L wastewater tank, so it
is intended for compact-area cleaning rather than uninterrupted
large-site operation. Refilling frequency depends on the water-flow setting, floor
condition and cleaning method. Buyers with long uninterrupted
routes should compare the tank capacity with their planned cleaning
schedule.
6. Does the T1 leave the floor dry after cleaning?
The supplied specification does not state the squeegee width or
vacuum-motor rating, so drying performance should be confirmed
before purchase. Ask the supplier to provide the squeegee configuration,
vacuum-motor power, water-recovery test results and replacement
rubber-blade specifications when immediate floor drying is
required.
7. What battery system does the T1 use?
The confirmed electrical specification is a 24V battery system. Battery capacity, battery chemistry and charging time are not
stated in the supplied specifications. Buyers should confirm
whether the quotation includes lead-acid or lithium batteries, the
amp-hour rating, charger type and local input voltage.
8. Is the T1 easy to transport and store?
The T1 has a compact footprint but requires planned handling
because it weighs 65kg. Its dimensions are 518 × 410 × 1,208mm. Confirm vehicle access,
loading method, elevator capacity, storage height and whether the
handle can be folded or removed before arranging transportation.
9. Which floor surfaces can the T1 clean?
The T1 should be fitted with the correct brush or pad for each
hard-floor surface. Before ordering, confirm compatibility with the intended material,
such as tile, sealed concrete, terrazzo, vinyl or stone. Sensitive
and coated floors should be tested in a small area with the
recommended pad and cleaning chemical.
10. What should an overseas buyer confirm before ordering the T1?
Confirm the complete electrical, water-recovery, consumable and
after-sales configuration in writing. The purchase specification should include battery capacity and
chemistry, charger voltage and plug, squeegee width, vacuum-motor
power, brush or pad type, spare rubber blades, warranty coverage,
packaging dimensions, gross weight and replacement-parts
availability.
About this supplier
Guangdong Hewan Information Technology Co., Ltd., established in
2011, specializes in commercial and industrial cleaning equipment,
including walk-behind and ride-on floor scrubbers. The company
supplies cleaning equipment solutions to customers in multiple
international markets.
Company overview
