Advantage:
◆ Upper computer programming software compatible with Works 2/GX
Developer8.86 (supports Ladder diagram and SFC language, does not
support structured programming/labels).
◆ Powerful, compatible with FX3G/FX3U/FX3S PLC, high processing
speed.
◆ Military level 32 bit CPU adopted, which is faster and more
adapted to industrial environment of high electromagnetic
interference.
◆ Special encryption, prevent illegal reading thoroughly. 8-bit
encryption, 12345678 as password can thoroughly prevent reading of
ladder logic program.
◆ Clock supported, rechargeable battery adopted.
◆ Default With 1 HMI Downloading port, 2 PLC programming ports: one
MiniB USB port with faster downloading speed; one Rs232 programming
port with 8 mouse hole sockets, and 1 USB port.
◆ Support programming port protocol/Modbus protocol/Rs protocol/BD
board protocol,
PLC communication with each other and other devices is easily
achieved.
◆ Convenient for wiring, adopting 3.81mm pluggable terminals.
◆ Flexible, can be customized accordingly.
◆ Easy installation. DIN-Rail (35mm width) installation and fixed
hole installation.Flexible, can be customized accordingly.
◆ 32K steps program capacity, 32k registers of hold on when power
off, support interrupt,linear&circular interpolation,PID and
self-tuning,high powerful.
◆ PLC Software is compatible to Mitsubishi, HMI use Coolmay
programming software.
Introduction of each interface and indicator:
POWER: Power indicator, connected to the power light
RUN: PLC running status indicator. This light is on when the PLC is
running.
COM: touch screen and PLC communication status indicator, when the
two communicate, the light is on
Power terminal: The positive and negative terminals of the DC24V
switching power supply are respectively connected to the DC24V and
0V of the power supply terminal.
PLC programming port: two PLC programming ports (MiniB type usb
port / RS232), PLC program can be downloaded through 232
programming line or USB cable download
Touch screen programming port: download touch screen configuration
program
USB interface: mainly can be directly inserted into the U disk of
the file system FAT 32, can also be inserted into the mouse.
