ODM OEM 8 Channels HMI Interface With PLC High Speed Pulse Count
8 Channels High-Speed Pulse Passive NPN Digital Input HMI PLC All
In One Up To 30DI 30DO 16AD 8DA MView Software
QM3G HMI/PLC all-in-one provides better solutions for machine
manufacturers andend users by integrating PLC, HMI, l/0 and analog.
Easy to use, cost saving and high flexibility. It uses pluggable
terminals on the inputs and outputs, power supplies, making
installation and maintenance easier. Some users may not have any
electrical knowledge, but they will be able to disassemble and
install the devices, no need to worry how to wire. If the equipment
broke down, manufactures can only replace a new one instead of
door-to-door maintenance.
Parameter:
| Display | Dimension | 275*194*36mm |
| Cutout size | 262*180mm |
| Type | 10"TFT |
| Feature | 60K-color resistive touch screen, supports portrait display |
| Memory | RAM | 64MB |
| ROM | NOR Flash 16MB |
| CPU | 32bit CPU 408MHz |
| I/O | DI/DO | Max 30DI/30DO (max 28MR) |
| DI/DO level | Input: Passive NPN, public terminal isolated Transistor output: Low level NPN, COM connect to negative; Relay
output: Normally open dry contact |
| DO type and load | Relay MR/MOS tube, MOS tube: 2A/point, 4A/4 point COM, 5A/12 point
COM; MR: 2A/point, 5A/12 point COM. |
Analog I/O (optional) | Max 12AI/8AO |
| AI type (optional) | Thermocouple E/E_/K/K_/S/S_/T/T_/J/J_ / PT100/ PT1000/ NTC10K/
NTC50K/ NTC100K/ |
| AO type (optional) | 0~10V /0~5V/ 0~20mA/ 4~20mA/ mixed/ -5~5V/ -10~10V (2AO for 1 minus voltage) |
| High-speed function | High-speed counting | Single phase 6 channel 60KHz, or 2 AB 60KHz + 1 AB 10KHz, or 2 ABZ 60KHz + 1 AB phase 10 KHz |
| High-speed pulse | 8 channels, Y0-Y3 is 100KHz, Y4-Y7 is 10KHz. High-speed counting + high-speed pulse < 480KHz |
| Connection | HMI | Type-B HMI download port (can download PLC program through the USB
penetrating function), RS232 |
| 1 RS485 (changed from default RS232) |
| PLC | 1 Mini USB, 1 RS232 (program port) |
| 1 RS485 or 2 RS485 COM ports (one is changed from the default RS232
port) |
| CAN (2.0A/B) port, Ethernet port, WIFI (will occupy default RS232
port) |
| Software | HMI | Coolmay mView HMI Programming Software |
| PLC | Compatible with Mitsubishi GX Developer 8.86 and WORKS 2 |
Features:
- Integrated PLC, HMl, digital I/O(DW/DO), analog I/O(AD/DA), high
speed functions, etc...
- Compatible with FX3G/FX3U/FX3S PLC, fast operation.
- Up to 30DI/30DO,16AD/8DA.
- Default 2 PLC programming ports, 1 HMl download port.
- Supports optional one or two Rs485, CAN, WIFl, network port on
PLC, and supports optional Rs232, Rs485, network port (under
development) on HMI.
- Supports multi-channel high speed count and pulse functions.
- 32K-step program capacity and 32Kpower retentive registers.
Supports interruption, linear arc interpolation and PID
self-tuning.
- Supports special encryption. HMl and PLC can be encrypted
respectively. Set PLC password as 12345678 can prohibit reading
program completely. (Note:PLC only supports 8-bit password.)
- Combined with Coolmay network modules can realize remotely
control.
- Supports OEM and ODM.
