Plastic Board Extrusion Machine with T die Thickness from 5mm to
20mm
Plastic Board Extrusion Machine Production line composition
Item | Machine | QTY |
1 | Auto loader | 1set |
2 | Double-Screw Extruder | 1set |
3 | Die head and mould | 1set |
4 | Calibrating machine | 1set |
5 | Traction machine | 1set |
6 | Cutting machine | 1 set |
7 | Stacker | 1set |
Plastic Board Extrusion Machine HYPET Unique Advantages
a. The company provides formulas and a full set of technology. The
whole production line has the characteristics of large output,
stable extrusion and high foaming ratio.
b.The extruder is designed as a special screw barrel for PVC and
wood-plastic foaming. The vented structure. The surface of the
screw barrel is sprayed with bimetal, which effectively reduces the
problem of large wear on the screw barrel by PVC and wood-plastic
raw materials. The service life of the machine is greatly improved.
Plastic Board Extrusion Machine Configuration list
Note: This table as attached file which is for selection of the
configuration on the whole line
| SN | Items | Choosing configuration |
| 1 | Production control system | Siemens PLC control system |
| 2 | Cooling system of the main control electric cabinet | Fan cooling cabinet |
| 3 | Main motor | AC motor with famous inverter |
| 4 | Pressure sensor | HYPET individual temperature and pressure control in two parts |
| 5 | Core thermoregulation control | Internal closed loop heat balancing system. |
| 6 | Material of screw & barrel type | Nitro Alloy with bi-metal in two parts |
| 7 | Quantitative feeding system’s mixing function | Standard dosing device in single screw type. |
II. Plastic Board Extrusion Machine Condition of use
1. Plastic Board Extrusion Machine Technical features of whole line
| SN | Specification | Description | Remark |
| 1 | Suitable material | PVC and wood powder mixed composite | |
| 2 | Product size | Width: 1,220mm, thickness: 5~20mm | |
| 3 | Max. output | 300-400 kg/h | |
| 4 | Test and accept | Based on HYPET standard formula. | |
| 5 | Center height | 1,100mm | |
| 6 | Whole line size (L x W x H) | 22,000 x 2,100 x 2,200mm | |
| 7 | Operation direction | From right to left | |
| 8 | Color of equipment | HYPET white color | |
| 9 | Control of whole production | Refer to the “configuration list”. | |
| Note | Extrusion capacity will be changed according the processing
material and working conditions |
2. Plastic Board Extrusion Machine Circumstances condition
| SN | Condition | Specification | Description |
| 1 | Natural circumstance condition | Working place | Indoor use |
| Power source | No dangerous area |
| Humidity | 55%~85% no condensation |
| Temperature | 0~40 ℃ |
| 2 | Electricity source | Installation capacity | 200 kW |
| Actual consumption | 160 kW |
| Power supply | 3P+N+PE |
| Voltage/Frequency | 380V/50Hz other can be option |
| 3 | Cooling water | Temperature | ≤15 ℃ |
| Water pressure | ≥0.3MPa |
| Flow | ~15 m3/h |
| 4 | Air condition | Compressor air pressure | ≥0.6MPa |
| Flow | ~0.9 m3/min |
Plastic Board Extrusion Machine
Plastic Board Extrusion Machine Terms & conditions
1. Plastic Board Extrusion Machine Training and services
1) Instruction of field installation.
2) Equipment field debugging and trial run if required by the buyer
according to the rule.
3) Training on field operation and maintenance for customer's
personnel.
4) Provide technical consultation service on long-term basis.
2. Plastic Board Extrusion Machine Installation and debugging
When the machine arrives at site, the customer should install it on
the appropriate position according to the specifications provided
by the supplier; and then the supplier should send its engineers to
the site if requirement approved,in order to instruct the customer
about trial run and debugging. The customer should provide
necessary conditions for trial run and provide materials for trial
run, and should decide the processing conditions in trial run with
consideration of the supplier's opinions.
1) The price covers the pre-commissioning of the machinery before
shipment at Seller's site. The Seller is obliged to test the
performance of machinery.
2) The Buyer is obliged to provide suitable space, tools and
manpower for the commissioning of the order.
3) This Price does not included commission and installation in
buyer’s factory.
