Automatic Carton Box Flexo Printer Slotter Rotary Die Cutter with
Vibrator and Auto Stacker Machine High Quality and Good Service
General Specifications
TP-CR Series open & close type flexo folder gluer represents of
Quality, Consistency, Efficiency and Economic.
High speed inline top flexo print casemaker with down folding
provides a complete carton boxes producing solutions.
The machine is designed and made to high quality and safety
standard, stable and consistency high printing quality maximize the
production efficiency.
The Photo of Machine
FEEDING SECTION
Electric machine control clutch bell, moving last warning bell ring
, ensuring the safety of operation personnel.
Drive shaft with a safe clutch to avoid misuse and damage to the
machine (the machine is not fixed, the host can not start
operation).
Pneumatic interlocking device .
Host motor start up protection device .
- Adsorption leading edge Feeder system
lead edge feeder institution can greatly reduce clogging phenomenon
in the process of cardboard paper.
Suction fan auxiliary feeder,make sure the winding paperboard
feeding smoothly,The wind volume can be adjusted according to the
size of the board.,The maximum guarantee of the vacuum adsorption
of cardboard, so that more accurate to send paper.
front baffle and back baffle adopt manual adjust gap, feeder
lift-right baffle adopt electric adjust gap.
feeder wheels adopt polyurethane material made,Large friction and
long life.
it suitable for 3layers,5layers and 7layers corrugated cardboard,
include E flute cardboard.
supply paperboard counter,set-up and Display production quantity.
Equipped with dust removal mechanism ( remove dust brush ),
effectively remove cardboard surface impurities , improve the
quality of printing .
Seamless steel pipe , parcel wear-resisting rubber , correction and
balance
Lower feed roller chrome plating.
feeder Paper roll gap dial manual adjustment, adjustment range
0-11mm.
Operation control switch (PLC computer control)
the control panel is equipped with 10 Inch Touch screen, can
control the paper feeding, printing, slotting, die cutting, easy to
operate.
- Automatic zero return device
Paper feed, printing, slotting, cutting part of the electric
automatic return to zero.
In general, the use of automatic paper box to zero device, try to
print two can be adjusted to the correct position, reduce waste.
PRINTING SECTION
out diameter is 390mm(include printing plate 405mm).
Steel plate material, surface grinding, hard chromium plating.
Balance correction, smooth operation.
Fixed ratchet wheel shaft.
Full format plate ditch, suitable for 9mm hanging version.
Loading and unloading printing plate, pedal switch electric control
positive and negative.
Loading and unloading the printed board, pedal switch electric
control positive and negative.
out diameter is 154.3mm
Steel pipe surface grinding, hard chromium plating.
Balance correction, smooth operation.
printing pressure roller gap dial manual adjustment,adjustment
range 0-12mm.
Feeder roller gap dial manual adjustment, adjustment range is
0-12mm.
Introduction of Ceramic Roller with Ink Scraper System
Ceramic mesh roller with semi-closed scraper.
Scraper system adopts American technology, fine printing, ultra-low
loss.
Preventing volatilization is more environmentally friendly.
Ink-touching plate adjustment of reticulated roller, which is
pneumatic down-pressing action, automatic hoisting protection
device when air stops, while the center of transmission gear
remains unchanged.
Micro-adjustment of gap between screen roller and plate wheel.
Automatic induction ink detection system, including warning lights
and alarm bells.
Ink pump is a single diaphragm pneumatic pump, which can recover
the accumulated water filter and ink circulating system inside and
inside the pump.
The cartridge is quickly dismantled and the inner surface is
sprayed with Teflon to improve the cleaning efficiency.
Closed cover and recycling ink tank device, easy to clean and
leak-proof design.
Professional manufacturer to ensure the quality of scraper system.
The scraper inner chamber is sprayed with Teflon material, so that
the ink will not adhere to the chamber and is easy to clean.
Single scraper form makes disassembly more convenient. (Double
scrapers are available)
Hydraulic propulsion mode, so that the scraper smoothly adheres to
the ceramic roller, scraping ink more evenly.
Ink deficiency automatic alarm device to avoid damage to scraper
and ceramic mesh roller.
Automatic Cleaning System for Scraper and Ceramic Screen Roll
THE MAIN PARAMETERS:
Model
Parameters (MM) | 1224 |
| Max.Sheet Size (FxA) | 1190x2000 |
| Skip Feed Size (FxA) | 1400x2000 |
| Min.Sheet Size (FxA) | 380x720 |
| Max.Printing Area (FxA) | 1190x1960 |
| Top Speed (Sheet/min) | 250 |
| Economic Speed (sheet/min) | 120-200 |
| Sheet Thickness | 1.5-11 |
| Printing Plate Thickness (Sponge + Film + Plate) | 7.2 |
| Main Working Power (KW) | Flexo Printer + Inline | 70+40 |
| Total Power(KW) | Flexo Printer + Inline | 100+51 |
| Dimension (mm) | Flexo Printer | 10500x5200x2630 |
| Inline Folder Gluer | 14300x2600x2650 |
| Frame Thickness | Flexo Printer | 60mm |
| Folder Gluer | 40mm |
Rendering of The Product
