product description:
This equipment is a thermodynamic separation process. It uses the
different boiling points of the components in the mixed liquid or
liquid-solid system to evaporate the low-boiling components and
then condense to separate the entire components. It is a unit
operation process of evaporation and condensation. A combination of
unit operations. It is a liquid-liquid separation technology. Scope
of application
Features:
1. Large distillation volume
1. Heat and high temperature resistance
2. Good sealing
3. High transparency
4. The material is stable
5. Good corrosion resistance
6. Intelligent temperature control, magnetic stirring
1:New function: vacuum measuring
2:The vertical distillation head and its increased diameter can
enhance the evaporation efficiency
3:Change the G14 vacuum outlet of cold trap into the 24/40 one,
accelerating the vacuum pumping rate.
4:The collecting device can be controlled by a PTFE vacuum valve
instead of being passively received
5:The stainless steel poling support makes it more stable
Advantages of short-range new products:
1. Sensor upgrade-there is a thermometer casing outside the
thermometer that indirectly contacts the material, and the sealing
is better
2. The vacuum diameter becomes larger, to obtain a higher vacuum
degree, and the pumping speed increases
3. Optimized receiving method, more convenient operation (3
fractionation flasks become 1 sustainable discharge valve)
4. Higher evaporation efficiency
5. The distiller adopts a large distiller to increase the
evaporation area/volume
Precautions for use:
1. Check whether the inlet and outlet valves of the refrigeration
equipment are normally opened and the pressure is within the normal
range.
2. Check whether the power of each device is in the on position.
3. The equipment adopts electric heating, and the surface
temperature of the outer heating body is relatively high. Do not
touch it with your hands to avoid burns.
4. Check whether the ethanol in the low-temperature thermostat is
sufficient.
5. Pay attention to whether the liquid nitrogen in the liquid
nitrogen tank is sufficient.
6. Check whether the connection between the cold well and the
equipment is airtight.
--
