Product Description
High Manganese jaw crusher Jaw Plate
ZT high-manganese series steel jaw crusher wear parts(jaw
crushers/primary jaw crusher) have high wear resistance, high
safety and reliability features. So they are hot welcome by the jaw
crusher manufacturers and customers home and abroad which have been
sold to more than a dozen of countries:
Using indirect surface densener to improve the density of working
parts;
Adopting bottom-blowing argon and etc purification technology to
improve the metallurgical quality;
Using diversified inoculation treatment to achieve the refined
grain.
Description of jaw crusher Jaw Plate
jaw crusher wear parts is mainly used for crushing brittle
materials, which stress usually less than 200Mpa, such as iron ore,
gold ore, molybdenum ore, limestone and dolomite and etc. In the
construction industry, it is mainly used for crushing limestone,
cement clinker, gypsum and sandstone. Jaw crushers wear parts plate
is the main wear parts of jaw crushers and need to withstand
moderate impact while working. So the jaw plate requiring high
impact toughness and wear resistance. The high manganese steel
series material is the only choice for producing the jaw plates of
primary jaw crusher and small jaw crusher .
We choose the right materials and process for customers according
to the user’s working conditions, such as the hardness, fragile
degree of ore, specifications of the jaw crusher parts and etc.
PE400*600 coarse jaw crusher, main consideration of the material is
the toughness and work hardening rate; PE250*400 and PEX series of
jaw crusher, while working, the impact is relatively small. Main
consideration of the material is rising of initial hardness and
improving of the material work hardening capacity. Our jaw plate
can meet the requirement for different working condition and
primary jaw crusher for users.
Our company can also produce according to users’ requirement,
beside the GB/T 5680 brand multiple alloy high manganese steel
series products. Based on tenet customer first, user’s requirements
are our company research and development direction. We will provide
users with most satisfactory service.
Popular type of jaw crusher jaw plate:
Type | size(mm*mm*mm) | weight(kg) | tooth number |
100*600(swing plate) | 595*305*40 | 38 | 23 |
100*600(fixed plate) | 636*267*44 | 40 | 24 |
150*750(swing plate) | 750*480*72 | 115 | 24 |
150*750(fixed plate) | 805*430*60 | 100 | 25 |
250*1000(swing plate) | 1000*790*95 | 350 | 24 |
250*1000(fixed plate) | 1055*700*95 | 312 | 25 |
250*1200(swing plate) | 1200*790*95 | 420 | 29 |
250*1200(fixed plate) | 1255*700*95 | 375 | 30 |
150*250(swing plate) | 445*250*40 | 25 | 9 |
150*250(fixed plate) | 425*300*40 | 25 | 8 |
250*400(swing plate) | 725*400*60 | 100 | 10 |
250*400(fixed plate) | 635*460*70 | 80 | 11 |
400*600(swing plate) | 1000*600*75 | 228 | 11 |
400*600(fixed plate) | 960*660*75 | 216 | 12 |
500*750(swing plate) | 1330*750*130 | 540 | 8 |
500*750(fixed plate) | 1170*820*110 | 780 | 7 |
600*900(fixed plate) | 1240*960*150 | 735 | 9 or12 |
Manufacturing detail of jaw crusher jaw plate:
High manganese jaw plate |
Name | Jaw plate, swing jaw plate, fixed jaw plate, toggle plate,movable
jaw,fixed jaw,jaw crusher jaw |
Material | Mn13Cr2( M1 equivalent grades),Mn18Cr2(M2 equivalent grades) |
Control | Spectrometer chemical analysis and control while producing |
Molding Process | Water-glass sand casting or lost form casting |
Melting facility | Medium frequency electric furnace |
Heat Treatment | Anneal, quenching, tempering |
Quality Guarantee | One year against manufacturing defeat |
Testing | Hardness, flaw detector test |
Certificate | ISO9001~2008 Passed; BUREAU VERITAS |
Application | Cement firms, coal fired power plant ,mining firms ,metallurgy
,quarry firms |
Chemical Component of jaw crusher jaw plate:
Material | Chemical Composition(%) | Mechanical Property |
C | Si | Mn | Cr | Ak/cm | HB |
Mn13Cr2 | 1.1~1.4 | 1.7~2.2 | 12~15 | 1.7~2.2 | >140 | ≤220 |
Mn18Cr2 | 1.1~1.4 | 1.7~2.2 | 17~19 | 1.8~2.2 | >140 | ≤230 |
CITICIC is the leader in offering wear solutions to crusher
operators in China. We provide wear parts with designs and alloys
specifically developed for each application and specific location
within each crusher.Our crusher parts are made of manganese steel –
the toughest and most wear-resistant steel available. In addition
to the crusher components listed above, we also make cast
components for the crusher itself such as the pitman arm, side
plates, cheek plates, etc.
GENERAL DESCRIPTION
Wear components for crushing processes are subjected to severe
impact and high abrasion, requiring components made from impact
resistant and abrasion resistant alloys.
We increase crusher availability through:
Increased wear life
Less on-going wear part maintenance
Designs and tools for quicker change out
1. jaw crusher spares
Movable jaw plate,Fixed jaw plate,Lining plate,Grid plate,Spring
seat, Adjusting seat,Tension rod,
JM Series - JM806, JM907, JM1107, JM1108, JM1208, JM1211, JM1312,
JM1511, JM1513
CJ Series - CJ408,CJ409,CJ411,CJ412,CJ612,CJ613,CJ615,CJ815
CH Series - CH430(H3000,H3800),CH440(H4000,H4800) CH660(H6000
,H6800)CH880(H8000 ,H8800)
UJ Series - UJ310, UJ440i, UJ440E, UJ540, UJ640
CM Range - CM1208i, CM1208F, CM1211, CM1511
| Jaw Crusher Wearparts CITICIC replacement crusher jaws are engineered to last longer and
crush more efficiently, while reducing wear and tear on the
crusher. The crusher jaws produce better quality rock more consistently than
standard original equipment jaws, while reducing the need for
re-screening and re-crushing. CITGIC offers a full range of options
for all popular jaw crushers, including various tooth designs,
curves and alloys. CITICIC's crusher jaws give you: Machined surfaces for a consistent fit with less hassle and
downtime Large selection of tooth and curve configurations for optimum
performance in any application Unsurpassed alloys for extended wear life and lower cost per ton Toggle Plate Cheek Plate Jaw Wedges Jaw Plate |
Our Services
Aftersales service
LUOYANG ZHONGTAI INDUSTRIES able to provide:
1. ENGINEERED SPARES - DESIGN AND MANUFACTURING
2. LARGE VOLUME STEEL AND IRON CASTING FOUNDARIES
3. HUGE MACHINE SHOP CAPABILITIES
4. TRAINING PROGRAMMES
5. PREVENTATIVE MAINTENANCE PROGRAMS
6. PREVETATIVE MAINTENANCE SERVICES
7. COMPREHENSIVE MAINTENANCE PROGRAMS
LUOYANG ZHONGTAI INDUSTRIES’s Field Service Engineers are trained
specifically in the LUOYANG ZHONGTAI INDUSTRIES brand group
products but are capable of undertaking the servicing of other OEM
brands.
Our technicians are equipped with the most advanced technological
diagnostic equipment available to trouble shoot your equipment to
optimise performance and minimise down time.
LUOYANG ZHONGTAI INDUSTRIES also has an extensive capability in
supplying all you consumable and electrical/ mechanical spare part
needs.
FAQ
Q: Why we believe in luoyang zhongtai industries co., ltd:
A: 1. More than 30 years experience.
2.We are the leading professional supplier of mining machinery,
construction machinery, machines casting and forged parts.
3. All products achieved ISO9901:2000 quality management
certificate and CE, ROHS certificates.
Q:Delivery time:
A: Parts lead time 1-2months, machines 2-3months.
Q:Payment terms:
A: Accept payment type: T/T, L/C, Western union,Cash.
30% deposit when signed contract. Full payment paid before
shipping.
Q: Quality warranty?
A: Guarantee time: one year for main machinery. If something wrong
we will provide the technical advice and find solution immediately.
For those wearing parts we guarantee high quality parts for
long-term supply.
Q: After sales service?
A: we can supply technical guide for machines running test and
parts maintenance if end user needs.
