BC.080 ATIKER Type 12VDC 8W K01.001200 LPG/CNG Gas Cut-off Solenoid
Valve Coil
The Gas cut-off solenoid coil is an important electronic control
component in the LPG system that controls the operation of the
entire system. At normal temperature and pressure, LPG is in a
gaseous state and can be turned into a liquid with a little
pressurization or cooling. The main components of Liquefied
Petroleum Gas (LPG) are propane (G3H8) and butane (G4H10). Due to
its high octane rating at 12 ° C, it is an ideal vehicle fuel.
The dual-fuel vehicle is equipped with a LPG supply system while
retaining the original vehicle fuel system. It can be freely
converted between gasoline and LPG as needed during use. When a car
burns LPG and burns gasoline, the driver only needs to operate the
accelerator pedal to change the working condition of the engine and
adapt to the driving performance requirements of the car.
Technical parameter of BC.080 ATIKER type gas conversion solenoid coils:
| Model | BB12029210 |
| Normal voltage | DC10V; or OEM |
| Normal power | DC: 8W |
| Insulation class | H |
| Connection type | 6.3mm x 0.8mm |
| Application | K01.001200 LPG/CNG Gas Cut-off Solenoid Valve Coil |
| Weight | 74 g |
| Hole size | 12 mm |
| Height | 29.2 mm |
Main dimenison of 12VDC 8W LPG/CNG shut-off solenoid valve coils:
K01.001200 LPG/CNG Gas Cut-off Electric Magnetic Valve Coils:
Other electromagnetic coils for your reference:
Dual fuel car LPG system composition and working principle
1. The main composition and working principle of the dual fuel car
LPG system
The system consists of a gas storage tank, an evaporation
regulator, a gasoline solenoid valve, an LPG solenoid valve, a
power regulating valve, a venturi mixer, a fuel transfer switch,
and a control circuit.
When the fuel transfer switch is turned to the LPG position, the
gasoline solenoid valve is de-energized (cutting off the gasoline
supply) and the LPG solenoid valve is energized. The LPG liquid
comes out of the gas storage tank, passes through the LPG solenoid
valve to the evaporation regulator, and is depressurized and
vaporized to become a gas close to atmospheric pressure. The LPG
gas flows through the power regulating valve to the venturi mixer,
is thoroughly mixed with the air in the venturi mixer, and supplies
a certain amount of LPG gas to the carburetor throat (acting only
as a channel) according to the operating conditions of the engine.
2. Gas storage tank
The gas storage tank is installed in the luggage compartment at the
rear of the vehicle. Its function is to store the LPG. The
integrated valve is installed on it to ensure the safe use of the
gas storage tank and the whole system.
The functions of the various parts of the integrated valve are as
follows:
Filling the check valve: When the LPG is charged, the pressure of the LPG opens the check
valve against the spring force, and when the charging is stopped,
the check valve is automatically closed under the action of the
return spring to prevent the LPG from flowing back;
Limit charge valve: When LPG is added, the limit charge float gradually rises with the
increase of LPG liquid level. When the LPG in the gas tank reaches
the set liquid level (about 75%-80%), the limit charge valve is
closed, and the limit is limited. LPG continues to be filled,
providing the LPG expansion space necessary for temperature rise;
Liquid level sensor: a fuel gauge for sensing the liquid level in the gas tank and
transmitting the liquid level signal to the cab;
Safety release valve: When the pressure in the air tank exceeds the set safety limit
pressure, the safety valve automatically opens and releases LPG.
When the pressure drops to the set lower limit pressure, it
automatically closes to prevent a safety accident due to excessive
pressure.
Super flow stop valve: installed at the outlet port. When the LPG pipe ruptures and a
large amount of leakage occurs (flow rate exceeds 215ml/s), the gas
supply channel is closed, and only the middle hole of the valve
core has 3.3ml gas pipe liquid.
3. Gasoline LPG solenoid valve is connected to a gasoline solenoid
valve in the original gasoline pipeline, and an LPG solenoid valve
is arranged in the LPG pipeline. Their function is to switch on
(cut off) gasoline or LPG during fuel conversion.
Welcome to your inquiry!
