SpecificationWiegand 26bits/ Wiegand34bits /ABA/RS485/RS232 Standard Format Data
Output
Less than 0.2 second Response Speed
Less than 0.5 seconds Proximity Time Distance
2-15cmProximityRange
Support UEM 4100 ID Card or compatible with it( 64bits, Manchester
Code) and MF 1 Card (13.56 MHz Frequency)
-25 to 75 Ambient Temperature, 10%-90% Ambient Humidity
Built-in Antenna
Built-in LED (Double Color LED)
Built-in Loud Speaker (Buzzer)
DC 12V Working Voltage, 70mA Working Current
100 Meters Communication Distance
Real Time Data Transfer
Black or White color
PVC Case Material (Black Resin for Water-Proof Function)
114*76*16(mm)
Installation
Using + type screw driver to loosen the screw between the panel and
motherboard. And then embed the motherboard to the side wall with
the plastic plug and screws.
Wire Connection
Red: DC 5V-16V
Black: GND
Blue: D1
White: D0
Brown: BEEP
Green: LED
Yellow: Alarm
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive
anode and cathode of power supply
2. When external Power is used, make sure sharing the power with
Controller Box or using the same GND
3. When the distance between card reader and controller is more
than 50m, please use Power Line with at least 1.5 square cm Dia, or
using several parallel Network wires.
