1. Long cycle life
2. Application:wireless tattoo guns
3. High capacity:900mAh
4. Can support large working current.
CAUTIONS IN USE
To ensure proper use of the battery please read the manual
carefully before using it.
. Handling
§ Do not expose to, dispose of the battery in fire.
§ Do not put the battery in a charger or equipment with wrong
terminals connected.
§ Avoid shorting the battery
§ Avoid excessive physical shock or vibration.
§ Do not disassemble or deform the battery.
§ Do not immerse in water.
§ Do not use the battery mixed with other different make, type, or
model batteries.
§ Keep out of the reach of children.
. charge and discharge.Battery must be charged in appropriate
charger only.
§ Never use a modified or damaged charger.
§ Do not leave battery in charger over 24 hours.
. storage:Store the battery in a cool, dry and well-ventilated
area.
. disposal
- Regulations vary for different countries. Dispose of in accordance
with local regulations.
7 Period of Warranty
The period of warranty is one year from the date of shipment. Great
Power guarantees to give a replacement in case of cells with
defects proven due to manufacturing process instead of the customer
abuse and misuse.
The batteries should be stored at room temperature, charged to
about 30% to 50% of capacity.
We recommend that batteries be charged about once per half a year
to prevent over discharge.
- Other The Chemical Reaction
Because batteries utilize a chemical reaction, battery performance
will deteriorate over time even if stored for a long period of time
without being used. In addition, if the various usage conditions
such as charge, discharge, ambient temperature, etc. are not
maintained within the specified ranges the life expectancy of the
battery may be shortened or the device in which the battery is used
may be damaged by electrolyte leakage. If the batteries cannot
maintain a charge for long periods of time, even when they are
charged correctly, this may indicate it is time to change the
battery.
Any other items which are not covered in this specification shall
be agreed by both parties.
