| Model | LO2M24R |
| Programming language | Ladder diagram(LD) / lnstruction list / Sequential function
chart(SFC) |
| Program capacity | 32k steps |
| Storage capacity | Date (D) | [D0~D127] 128points General / [D128~D7999] 7872points Retentive /
[D8000~D8511]512points Special |
| Expansion(R) | [R0~R22999] 23000points Support power-down retention /
[R23000~R23999] 1000points Internal use |
| Expansion model | Max limit of 31 units: max 12 analog input/output respectively |
| Max l/O | FX3U mode: 512 points; FX3G mode: 256 points (the sum of input and
output points) |
| CPU Digital I/O | 12DI/ 12DO |
| CPU analog I/O | 4AI/4AO |
| AI Type | 2*0-10V, 2*0-20mA(4-20mA) |
| AO Type | 2*0-10V, 2*0-20mA(4-20mA) |
| Timer T | [TO~T199] 200points 100ms General / [ [T250~T255] 6points 100ms
Retentive
[T246~T249] 4points 1ms cumulative Retentive / [T256~T319] 64points
1ms General
[T200~T245] 46points 10ms General |
※The 10ms timer is affected by the scan period.
lf the scan period is 12ms,the timer becomes 12ms and executes
once. |
| 16-bit counter C | [CO~C15] 16points General |
| 32-bit counter C | [C220~C234] 15points Retentive |
| [C235~C245 Single phase single counting][C246~C250 single phase
double counting] |
| [C251~C255 Two-phase double counting] |
| High-speed pulse | 4-axis 200KHz+4-axis 50KHz (Y0-Y3 each 200KHz; Y4-Y7 each 50KHz,
total should not be over 200KHz) |
| High-speed counter | Single phase 6 channels 60KHz, or AB(Z) phase 2 channels 60KHz+AB phase 1 channel 10KHz |
| Do type | LO2M32T/LO2M24T: Transistor output, load maximum 500mA, low level
NPN, COM connected to negative |
| LO2M32R/LO2M24R: Relay output, load maximum 2A, dry contact, COM
can be connected to positive ornegative |
| Default COM | Type-C, RS-232, RS-485*2, Ethernet, CAN |
| Protocol | Programming port Modbus RTU, Modbus TCP, Modbus UDP, freeport protocol, CAN, Ethernet/IP, BD board |
Data backup function No
battery storage | Program | Flash ROM |
| Retentive area | MRAM has no write limit |
| Calendar(RTC) | Commercially available batteries CR1620(optional) |
| Self-diagnosis | CPU abnormalities, internal memory problems, etc |
| Rated input voltage | 24VDC(土10%) |
| Software | Compatible with GX WORKS 2 |
| Detailed info. refer to Coolmay L02 Series PLC Progarmming Manual
L02 Series PLC Controller User Manual |
