CX-680 Automatic DC Small Cable Wire Winding Binding Tying Machine
Technical parameter:
| Molde of machine | CX-380 |
| Capacity | 2,300pcs-2,500pcs/hr |
| Cores Stripping length | 6mm-12mm |
| Pass yeild | ≥99.8% |
| Max. cores seperation length | 20mm-60mm |
| Dip tinning Length | 3mm-12mm |
| Air pressure | 0.5-0.7Mpa |
| Power | ≤0.8kw |
| Voltage&frequency | AC 220V 50Hz |
| Dimension | 1,100mm*500mm*1,110mm |
| Weight | 280kg |
Description: Automatic cable twist tie machine be provided function with coil
wind, auto twist tie finished in one end. Our automatic coil
winding machine can twist tie many kinds of cable according to
every customer's requirements.
Operation Steps:
1. placement of wire: place the plug end of the wire into the wire
reel locating block and press starting switch to enable thewire to
be processed in each link by attaching to the winding rod until the
wire binding is completed
2. adjustment of the wire length: loose the adjusting holder and
adjust the wire to the desired length to the left and right, and
then tighten the screw
3. Adjustment of wire allowance at the other end: loose the air
cylinder base to enable the cylinder to stretch out, and then move
the air cylinder base to get the desired length of the wire at the
other end
Company Profile
Dongguan Chenxin Automation Equipment Co., Ltd. is a company
engaged in the manufacture of automation equipment for the
processing of power cord AC plugs and wire harness ends processing
for more than 10 years.
The company's main products are a fully automatic plug crimping
machine, fully automatic wire tinning machine series, fully
automatic wire winding machine series, semi-auto terminal crimping
machine, automatic cutting machine, automatic coaxial wire
stripping machine. Provide safer, labor-saving, efficient, and
high-quality equipment for the power cord production, wire harness
end processing industry.
Finished product
