25T/H RO Water purification system / plant / machine PLC control
full automatic
Brief introduction of Water purification plant
The Water purification plant is suitable for such industries as
cosmetics, pharmacy, food and electronics has been deeply favored
by users for its stable water quality and simple operation.
The system solves the troubles of frequent regeneration and
cleaning during the use of ion exchanging water purifier. By
adopting physical principle, it enables the water to pass the
reverse osmosis film with a diameter of one ten-thousandth of a
micron and separates impurities, ion, microbes and colloids in the
water, so as to meet the water requirements in cosmetics
industries.
Reverse osmosis process uses semi permeable spiral wound membranes
to separate and remove dissolved solids, organic, pyrogens, sub
micron colloidal matter and bacteria from water. Feed water is
delivered under a pressure of approximately 16 kg/cm2 through
reverse osmosis membranes. Water permeates the minute pores of the
membrane and is delivered as purified water. Impurities in the
water are concentrated in the reject stream and flushed to drain.
Reverse osmosis is capable of removing 90%-99% of total dissolved
solids (TDS), 99% of organic, including pyrogens, and 99% of all
bacteria in the feed water.
According to the customer's local water testing report,we adopt
different equipments to produce drinking water of pure water or
mineral water,etc.
Features of Water purification plant
1.This system occupy little space, easy to operate, wide
application range.
2.When used for disposing industries water, the reverse osmosis
device does not consume large amounts of acids and alkalies, and
there is no secondary pollution. In addition, it’s operation cost
is also low.
3.Reverse osmosis desalting rate ≥99%, machine desalting rate ≥97%.
98% of organic matters, colloids and bacteria can be removed.
4.Finished water under good electric conductivity, one stage ≤10μ
s/cm, two stage around 2-3μ s/cm, EDI ≤0.5μ s/cm (base on raw water
≤300μ s/cm).
5.High operation automation degree. It is unattended. The machine
will automatically stop in case of water sufficiency and
automatically start in case of no water. Timed flushing of front
filtering materials by automatic controller. Automatic flushing of
reverse osmosis film by IC microcomputer controller. Online display
of raw water and pure water electric conductivity.
6.Imported parts account for over 90%.
Specification
