BP9325 MV Signal Silicon Piezoresistive Industrial Pressure Sensor
BP9325 Silicon Piezoresistive Pressure Sensor
Introduction of industrial pressure sensor:
BP9325 silicon piezoresistive pressure sensor is a highly stable
diffused silicon element. The differential pressure of the measured medium is
transmitted to the silicon diaphragm through a 316L isolation diaphragm and
silicone oil. By utilizing the piezoresistive effect of the diffused silicon, it
achieves the purpose of measuring the pressure of liquids and gases
Product Features of industrial pressure sensor:
1. Utilizes advanced technology and 316L stainless steel casing,
with materials
2. such as full titanium and Hastelloy diaphragm
3. Employs thick-film circuits for temperature compensation and
zero-point correction
4. High reliability, repeatability, and stability
Applications of industrial pressure sensor:
1. Suitable for measuring the pressure of non-corrosive gases and
liquids with 316L stainless steel
2. Applied in industrial on-site processes such as petroleum,
chemical, metallurgy, power generation, and hydrology
3. Used in the marine and aviation industries
4. Hydraulic and pneumatic control systems
5. Process control
Basic Condition of industrial pressure sensor:
1. Power Supply: ≤2mADC (typical value 1.5mADC)
2. Input Impedance: 2.5KΩ~6KΩ
3. Output Impedance:2.5KΩ~6KΩ
4. Electrical Connection: Gold-plated Kovar pins or 100mm
high-temperature wires
| Performance Parameters: |
| Measurement Range | Gauge(G) | 10KPa,20KPa,35KPa,100KPa,200KPa,350KPa,1000KPa,2000Kpa |
| Absolute(A) | 100KPaA,200KPaA,350KPaA,700KPaA,1000KPaA,2000KPaA |
| Sealed (S) | 3500KPa,7MPa,10MPa,20MPa,40MPa,60MPa,100MPa |
| Typ | Max | Unit |
| Linearity | ±0.15 | ±0.3 | %F.S |
| Repeatability | 0.05 | 0.1 | %F.S |
| Hysteresis | 0.05 | 0.1 | %F.S |
| Zero Offset Output | 0±1 | 0±2 | mV |
| Full Scale Output | ≤20KPa | 50±10 | 50±30 | mV |
| ≥35kPa | 100±10 | 100±30 | mV |
| Zero Offset Temp. Drift | ≤20KPa | ±1 | ±2 | %F.S |
| ≥35kPa | ±0.5 | ±1 | %F.S |
| Full Scale Temp. Drift | ≤20KPa | ±1 | ±2 | %F.S |
| ≥35kPa | ±0.5 | ±1 | %F.S |
| Compensated Temp. | ≤20KPa | 0~50 | ºC |
| ≥35kPa | 0~70 | ºC |
| Operating Temperature | -20~80 | ºC |
| Storage Temperature | -40~125 | ºC |
| Allowable Overload | Take the smaller value between 3 times the full scale or 120MPa | |
| Burst Pressure | 5X the full scale | |
| Long-term Stability | 0.2 % | F.S/Year |
| Diaphragm Material | 316L | |
| Insulation Resistance | ≥200MΩ 100VDC | |
| O-ring Seal | Nitrile rubber or Fluoro rubber | |
| Vibration | No change under conditions of 10gRMS, 20Hz to 2000Hz | |
| Shock | 100g,11ms | |
| Response Time | ≤1ms | |
| Filling Medium | Silicon Oil | |
| Weight | ~0.1kg | |
| The parameters are tested under the following conditions: Constant
current of 1.5mA and ambient temperature of 25°C |
To recommend you the most suitable sensor, please tell us below
information.
1. Working temperature: -40~125 °C ?
2. Test range?
3. Output: 4-20mA , RS485 or others?
4. Screw: G1/4, 1/4NPT, R1/4, M20*1.5?
5. Electrical connection: Hirschmann, Packard, Direct lead?
6. Order quantity: ?
