Welding Guns

Brand Name:HongCe

Model Number:HC-IPTE-001

Place of Origin:China

IPX3–IPX6 Rain & Water Spray Test Chamber for Luminaires IEC 60529 Waterproof Testing Equipment for Lighting Products Product Overview Water resistance means more than just meeting standards—it ensures product safety and lasting durability. The IPX3-IPX6 ...

Brand Name:HongCe

Model Number:HJAU

Place of Origin:China

1.0E-6mbar.l/s Two Chamber Vacuum Helium Leak Test System for Automotive Air Conditioning Components 30s/pc Cycle Time This series of vacuum helium leak test system is applied on mass production online detection for automotive air parts, such as ...

Place of Origin:China

Brand Name:HongCe

Model Number:FL-1

Flexing Test Swivel Machine , Plug Cord Flexibility Tester IEC60884-1 Figure 21 Product details: The FL-1 Plug Cord Flexibility Tester is designed and manufactured according to the standard requirement of IEC 60884-1 figure 21 which calls for 10,000 ...

Brand Name:HongCe

Model Number:HT-PL1

Place of Origin:China

IEC 62196-1 Connection Set Of Conductive Charging For Electric Vehicles Test Machine Introduction: IEC 61851-1 specifies electric vehicle conductive charging equipment. This international standard, referred to as the IEC 60309 series in IEC 61851-1, ...

Place of Origin:China

Brand Name:HongCe

Model Number:SG-1

Screwed Glands Tester IEC60598-1 clause 4.12.5 Torque Tests On Glands Product details: The device is used to check screwed glands, and conform to the IEC60598-1 clause 4.12.5. Screwed glands shall be fitted with a cylindrical metal rod having a diameter ...

Place of Origin:China

Brand Name:HongCe

Model Number:PI-1

Plug Pins Insulating Sleeves Abnormal Heat Resistance Testing Machine IEC60884-1 Figure 40 Product details: This device meets the standards of IEC60884-1 figure 40. It is applicable to test improper heating resistance and burning resistance of bolt and ...

Place of Origin:China

Brand Name:HongCe

Model Number:ADL-1

Appearance Change Of Lanterns Light Testing Equipment Adjusting Devices IEC60598-1 R500mm Product information: The device is used to detect adjustment device, and confirm to the IEC60598-1 clause 4.14.3. The adjustment device, equipped with the appropriate...

Brand Name:HongCe

Model Number:EOB-2

Place of Origin:China

Intelligent Test Meter For Lamp Cap And Holders Light Testing Equipment With Digital Display Product information: Lamp cap twist apparatus EOB-2 built in intelligent microprocessor, is a new generation of intelligent products, with the following ...

Brand Name:HongCe

Model Number:HJ0608A

Place of Origin:China

IEC60335-2-14 Flexing Test Apparatus, 2000 Flexing times, 6/min Flexing Rate Standard description(IEC60335-2-14 clause 25.14): 25.14 Addition: Electrical Appliance Tester Hand-held blenders and hand-held mixers are also subjected to the following test whi...

Brand Name:HongCe

Model Number:HJ0608A

Place of Origin:China

IEC60335-1 Touch Screen Supply Cord Flexing Test Apparatus Electrical Appliance Tester Standard description(IEC60335-1 clause 23.3): Different parts of an appliance that can move relative to each other in normal use or during user maintenance shall not ...

Brand Name:HongCe

Model Number:HJ0604

Place of Origin:China

Abrasion Strength Resistance Test Machine HJ0604 Description: This device is used to process scratch test for the solid insulation boards and accessible parts of house appliances and similar products, to ensure that accessible parts of solid insulation ...

Brand Name:HongCe

Model Number:RK2674A

Place of Origin:China

IEC60065:2014 clause 8.21 Hi-pot (Voltage Withstand) Tester IEC60065:2014 clause 8.21 Hi-pot (Voltage Withstand) Tester Measuring The Voltage Withstand Strength Standard: Confirm to IEC60065:2014 clause 8.21, IEC60950, IEC60335, IEC60598-1. Application: ...

Place of Origin:China

Brand Name:HongCe

Model Number:YLH-1

Oxygen (Air) Bomb Aging Chamber Product information: This aging tester conforms to the standard requirements of GB/T2951.12-2008 and GB/T5013－2008 as well as VDE. It is applicable for the aging test of the electric wire, the insulation layer and sheath of ...

Brand Name:HongCe

Model Number:HH0810

Place of Origin:China

IEC60529 IPX5X IPX6X Sand And Dust 1000L PLC Control Test Chamber Figure 2 Product Introduction The sand and dust test chamber is designed and manufactured according to IEC60529-2001 < Degrees of protection provided by enclosure (IP code)> Fig 2, IEC60598...

Brand Name:HongCe

Model Number:HH0801

Place of Origin:China

Vertical Drip Rain Testing Machine HH0801 Description: This is to testing of IPX1 and IPX2 protection aginst water of electronic appliances, lamps, electrical cabinets, electrical components, car, motorcycle, electrical products. Confirm to standards: IEC ...

Brand Name:HongCe

Model Number:HT-I02T

Place of Origin:China

IEC60529 Standard Test Finger Probe B HT-I02T With 10N , 20N , 30N Force IEC 61032 figure 2 probe B: The Test Finger Probe B is a precision test probe made according to Figure 2 (Fig. 2) of the IEC61032 (Test probe B) and is used to simulate a human finger...

Brand Name:HongCe

Model Number:HDD8301

Place of Origin:China

..., diameter 12mm, length 50mm Standard: IEC 60745-2-5 : Particular requirements for circular saws, clause 19.101.2 and Figure 105 Application: This probe is applicable to verify the upper guard protection against to touch the blade. Test sample: Circular ...

Brand Name:HongCe

Model Number:HT-I02

Place of Origin:China

UL1278 Figure 8.4 Articulate Probe Test Probe B - Verify Accessibility of Live Parts Product information: An electrical part of a heater shall be so located or enclosed that protection against unintentional contact with uninsulated live parts will be ...

Brand Name:HongCe

Model Number:HT-U02

Place of Origin:China

UL507 Probe for Film-coated Wire ELECTRIC FANS TEST 101.6mm length 19.05mm Diameter Description in UL507 Clause 9.1~9.3: 9 Accessibility of Live Parts 9.1 General 9.1.1 To reduce the risk of unintentional contact that involves a risk of electric ...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-U05

Cone Probe Conform to the UL1278 Fig 10.1 UL Test Probe Product details: This probe conforms to the standard requirement of UL1278 Fig 10.1. The handle is made of nylon while the probe is made of stainless steel. Standard:UL1278 Fig 10.1. Application:The ...