Brand Name:HongCe

Model Number:VF-1

Place of Origin:China

IEC60332-1 Flammability Testing Equipment For Single Insulated Wire or Cable Burner Tilt 45° Purpose: When the wire and cable products are short circuited or exposed to fire, the insulation or sheath may burn. In many occasions (coal mines, ships, subways...

Brand Name:HongCe

Model Number:HH0815

Place of Origin:China

15 Degrees Tiltable Rotating Stage Ingress Protection Test Equipment 1r/min For IPX1-IPX6 IEC 60529: 1 4.2.2 Test for second characteristic numeral 2 with the drip box The dripping device is the same as specified in 1 4.2.1 adjusted to provide the water ...

Brand Name:HongCe

Model Number:HJ0609

Place of Origin:China

IEC60335-1 Cord Anchorage Torque And Twist Tester - Electrical Appliance Tester 1 Cycle/S Standard: Clause 25.15 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements ,IEC60598-1 clause 5.2.10.3 and etc. ...

Brand Name:HongCe

Model Number:LT-3

Place of Origin:China

IEC60695 220V 50Hz Leakage Tracking Tester, 45 - 50 Drops / cm3​ Product introduction: The test machine is designed and manufactured according to the requirements of the relevant standards, such as IEC 60112, IEC60695 and etc. It is used for determination...

Brand Name:HongCe

Model Number:HJ094

Place of Origin:China

Two Chamber 30s/pc - Helium Leak Testing Equipment for Condenser and Evaporator 1.5*10-5 Mbar.L/s Product Introduction of Helium Leak Testing Equipment: Helium leak detection equipment is widely used because of its high sensitivity, various application ...

Brand Name:HongCe

Model Number:HC9922

Place of Origin:China

IEC 60884-1 - Tumbling Barrel Testing Machine - 5rpm / 10time Per Min IEC 60884-1 2013 clause 24.2: The specimens are individually subjected to the test Ec:Rough handling shocks, primarily for equipment-type specimens, procedure 2 of IEC 60068-2-31, the ...

Brand Name:HongCe

Model Number:HC9921A

Place of Origin:China

IEC60068-2-75 up to 50J Impact Testing Machine-Pendulum Hammer Test Apparatus With 1000mm Rigid Arm IEC60068-2-75 Clause 4.2: The test apparatus consists basically of a pendulum rotating at its upper end in such a way as to be kept in a vertical plane. The...

Brand Name:HongCe

Model Number:HVF-3

Place of Origin:China

IEC60695 Horizontal And Vertical Flame Tester - 50W And 500W IEC60695-11-10 7.2 Material testing The results of tests carried out on test specimens of different colour, thickness, density, molecular mass, anisotropic direction and type, or with different ...

Brand Name:HongCe

Model Number:LT-3

Place of Origin:China

IEC60112 Flammability Testing Equipment Determination of CTI And PTI Standard: IEC60112-2009 Method for the determination of the proof and the comparative tracking indices of solid insulating materials. It specifies the method of test for the determination...

Brand Name:HongCe

Model Number:HH0820

Place of Origin:China

IEC 60592 IPX1 to IPX8 Waterproof Ingress Protection Test Equipment Standard: IEC60529 degree of protection provided by enclosures (IP Code), clause 14.2.1, 14.2.2, 14.2.3, 14.2.4, 14.2.5, 14.2.6, 14.2.7, 14.2.8, and figure 3, figure 4, figure 5 and figure...

Brand Name:HongCe

Model Number:HC9914B

Place of Origin:China

IEC60884-1 Switch and Plug - Socket Endurance Tester With Liner and Rotating Station Product Introduction Plug Socket Tester The test machine is designed and manufactured according to IEC60884-1clause 20 and 21 fig 16, IEC60669-1 and etc. It is applicable...

Brand Name:HongCe

Model Number:HJ0614

Place of Origin:China

IEC60335-2-2 clause 21.101 Current-Carrying Hoses Crushing Resistance Tester 1.5kN Standard: This device meets the standard of IEC60335-2-2, clause 21.101. Electrical Appliance Tester Application: Suitable for the Current-carrying hoses crushing resistance...

Brand Name:HongCe

Model Number:HJ0617

Place of Origin:China

IEC60335-2-2 Current-Carrying Hoses Torsion Resistance Tester 10r/Min Bending Speed Standard: This device meets the standard of IEC60335-2-2, clause 21.104. Electrical Appliance Tester Application: Suitable for the Current-carrying hoses torsion resistance...

Brand Name:HongCe

Model Number:HJ0615

Place of Origin:China

IEC60335-2-2 Current-Carrying Hoses Abrasion Resistance Tester 30r/min Crank Speed Foreword: In practical work, the current carrying hose needs to be dragged or rubbed frequently, which is easy to cause abrasion. The abrasion resistance of the current ...

Brand Name:HongCe

Model Number:HJ0616

Place of Origin:China

IEC60335-2-2 Current-Carrying Hoses Flexing Resistance Tester 10r/min Flexing Speed Foreword: In practice, some current carrying hoses need to adapt to various environments for continuous expansion and bending. The current carrying hose with poor quality...

Brand Name:HongCe

Model Number:IPX56A

Place of Origin:China

IEC60529 IPX5-6 Spray Test Equipment With Φ6.3mm And 12.5mm Nozzle 500L Tank Product information: Ingress Protection Test Equipment The spray test system is designed and manufactured according to the standard IEC60529<

Brand Name:HongCe

Model Number:SH-9A

Place of Origin:China

IEC60068-2-75 Impact Testing Machine / Vertical Hammer Test Apparatus 0-1m Drop Height The hammer consists basically of a striking element which falls freely from rest through a vertical height, selected from Table 2, on to the specimen surface held in a ...

Brand Name:HongCe

Model Number:HDD8303

Place of Origin:China

IEC 60745-2-1 Electric Hammer Durability Test Apparatus Steel Ball Diameter 38mm Product Introduction: Impact durability test system for hammer is suitable for the durability test of the electric tools under 2.5 KW. This tester meets the requirement of ...

Brand Name:HongCe

Model Number:HH0815

Place of Origin:China

IEC 60529 Tiltable Rotating Stage Work With Waterproof Test Equipment, Made of Aluminum Alloy Product introduction: This turntable comes with an independent control cabinet, which can be used with IPX1~6 waterproof test equipment, to vertify the degrees...

Brand Name:HongCe

Model Number:HDX1303

Place of Origin:China

IEC60245-2 Cable Testing Equipment Static Flexibility Tester Clamp Height 1.5m At Least Standard:IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.2 and Figure 2 Rubber insulated...