| Sign In | Join Free | My himfr.com |
|
...conveyance of fluids ----Resistance to internal pressure----Test method and GB/T15560Standard test method for short-time hydraulic failure and resistance to constant internal pressure of the plastics pipes f...
... Test Method Application Test method for determining the reaction to fire performance of building materials and products (excluding flooring) and products specified in European Commission Resolution 2000/147...
..., ultraviolet irradiation pretreatment, water treatment, the above requirements can be pre-integrated with the A705 pretreatment tank helmet shock absorption performance test methods: the height of the drop ...
..."Extruded Polystyrene foam for Heat insulation (XPS)" Scope of application: It is mainly applicable to the test method for judging whether building materials have flammability under specified condi...
... of the flame resistance time of the facing fire retardant coating Conform to the standard: meet the requirements of GB/T 12441-2005 (Appendix A) test standard. Test station: 1 station Temperature uniformity...
..."Extruded Polystyrene foam for Heat insulation (XPS)" Scope of application: It is mainly applicable to the test method for judging whether building materials have flammability under specified condi...
DX8339 Fire Retardant Coating Combustion Testing Equipment (Daban method) Scope of application: Under specified conditions, the test method for testing the flame resistance characteristics of the facing fire re...
... Testing Equipment Overview: DX8602 ignition temperature tester is designed and manufactured in accordance with GB4610-2008 "Determination of Ignition Temperature of Plastic Hot Air Furnace Method"...
... -- 1993 "verification rules for the hardness of plastic ball indentation" 2. Applicable test method standard. 1. GB3398.1-2008 plastic hardness test part I: ball indentation method 2. Iso2039-1:20...
... of GB/T 20284-2006 standard "Monomer Combustion Test of Building Materials or Products" and the EN13823 "Monomer Combustion Test Method (SBI)" test standard requirements. Scope of applic...
... Thermal Retention Tester Applicable standards BS5335-2-2006 Velvet - Part 2: Determination of heat resistance of quilts filled with feathers and/or down Test Method for Thermal Conductivity of Textile Mater...
...AATCC 124 Smoothness Appearance Replicas are used to evaluate fabrics that have been tested according to AATCC Test Method 124 Appearance of Fabrics after Repeated Home Laundering & AATCC Test Method 143 App...
...Points - Cleveland open cup method and ASTM D 92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester.The Open Cup Flash Point Testing Machine is applicable to all petroleum products w...
...tested and classified using a new test method called the Single Burning Item (the SBI) EN 13823. The construction products directive of the European commission will require that all European Member states ev...
...tested and classified using a new test method called the Single Burning Item (the SBI) EN 13823. The construction products directive of the European commission will require that all European Member states ev...
... standard SH/T 0085 "Test Method for Corrosion of Engine Coolants (Glassware Method)". It is applicable to the determination of the corrosive effect of engine coolants on typical metal test specime...
...Low Temperature Pour Point and Cloud Point Test instrument is designed and made as per GB/T3535 "Standard Test Method for Pour Point of Petroleum Oils" and GB/T6986 "Standard Test Method for C...
...Test Methods for Measuring the Dielectric Constant and Dielectric Loss Factor of Electrical Insulating Materials at Power Frequency, audio Frequency and High Frequency (including meter wave length)" (eq...
... flame-resistant time standard and international automotive cable standards of low-voltage cables for automobiles unshielded horizontal flame test methods. lt is used for performance assessment of cable unde...
... SH/T 0085 "Test Method for Corrosion of Engine Coolants (Glassware Method)". It is applicable to the determination of the corrosive effect of engine coolants on typical metal test specimens under controlled...