Sign In | Join Free | My himfr.com |
|
...Current Transformer, Secondary Windings Full-Enclosed The secondary windings are full-enclosed in the flame retardant plastic shells, primary bushing or cable can pass through the inner hole, bottom has inst...
...Transformer Short-Circuit Protection for High-Voltage Current-Limiting Backup Fuse Product Description XRNT4-15.5, XRNT4-24, XRNT4-40.5 High voltage fuses for oil immersed transformer backup protection The s...
... with one core and coil assembly rated for measurement and protection, and then output multi ratio. Technical data 1.two windings Rated primary current(A) Accuracy class combination Rated secondary output(VA...
...Transformer Substation is a cutting-edge solution for power distribution that offers efficiency and reliability in a compact design. This Miniature Power Transformer is designed for indoor installation, maki...
...,GB/T18287,GB/T 31241-2014, etc. The red copper contactor is used as the switch element and the thermal relay as the protection device. When the circuit breaker is closed, the circuit of the tested battery i...
... voltage of 150VDC. The small size of these fuses is ideal for use in vehicles, providing high current ratings for short circuit protection. These fuses measure 20*55mm and have a breaking capacity of 20KA(1...
Automotive DC12V Current Control Relay Short Circuit Protection Uninterrupted Line Universal Automotive Relay introduces: The relay is kept in the released state by the permanent magnet. After the working volta...
The TYHD-3 cable indicator is suitable for the cable 35kV system (including bellow 35kV system).It can only judge short-circuit, without locally indicating function. When short-circuit happened in cable,It can ...
...depends entirely on the load current of the circuit being tested, but not on the secondary current; The current coil impedance of the current Transformer secondary coil and the relay are very small, so under...
... current and secondary current or primary current and ratio as per your requirements. For example if the energy meter is 5(80)A, you may need a current transformer with current to 80A or 100A. (2) Please spe...
... impedance test is the identification of operation in the transformer under the impact of short-circuit current, which is the most direct method to check the winding deformation of the transformer affected b...
...Secondary Equipment 80A 100A Current Transformer 1.Overview: ● Max Measurement Range to 80A ● High Accuracy Up to 0.1 Class ● With DC Immunity ● Comply with IEC62053-2019 ● Widely used for energy meter, smar...
...Current Transformer secondary current 1000A ratio1:10 accuracy 0.02 KE6331H Isolation Current Transformer KE6331H Isolation Current Transformer is used for test high voltage energy meter or used as high curr...
... Other technical parameter pls see as follow: Rated current ratio (A) Accuracy classes combination Rated output (VA) FS ALF Rated short-time thermal current (kA/S) Rated dynamic current ( kA) Measuring Prote...
...: FS<5 ● Maximum system voltage: 720V AC ● Test voltage: 3kV AC(1min) ● Rated frequency: 50/60Hz ● Rated short-time thermal current: Ith=40~60In ● Rated dynamic current: Idyn=2.5Ith ● Rated secondary current...
...Current Transformer Class 0.5 With Electric Meter FEATURE: Busbar mounting Primary current from 5A to 3000A.SPECIFICAIONS Rated Frequency 50/60Hz Rated test voltage 3kV AC. (1 min) Rated short-time thermal c...
...Current transformer: Primary current: Secondary current: Standard approval: Maximum voltage: Frequency: Rated load: Class: Short-time thermal current: Rated security coefficient: 5A-300A 5A,1A VDE0414,BS7626...