ASTM E165 Penetrant Testing Block Test Specimen YM-A With ISO Standard
![]() |
.... Treated to 920 degrees C for 30 minutes, water quenched, 650 degrees C for 3 hours, air cooled Material standard:according to ISO 10474-3.1.B,JIS G 0415-3.1.B Depth:100µm Width target value:0...
HUATEC GROUP CORPORATION
|
Chrome Plating Penetrant Ut Test Block Test Specimen YM-B3
![]() |
... plated on one side, and three radial crack areas were formed by applying different loads on the back of the block by Brinell hardness method. The location numbers were 1, 2 and 3 in order of size. The position, spacing and other requirements shall be in...
HUATEC GROUP CORPORATION
|
Aluminum Block Kitchenware Tester With Heater And Thermostat Aluminum Block Test Specimens
![]() |
...Block Kitchenware Tester with Heater and Thermostat Aluminum Block Test Specimens Introduction Estimated Packaging Dimensions: (W*D*H) 900*600*750mm Power supply source: single-phase, 220V±10%, 50/60Hz (can be appointed) Estimated Gross Weight: 80kg Specifications Suit for standard: CEN/TS 12983-2: 2005 Annex D & BS EN 12983 Annex M Diameter of the block......
Hai Da Labtester
|
Penetrant Testing Specimen Precision Star Tam Panel Ndt
![]() |
.... Treated to 920 degrees C for 30 minutes, water quenched, 650 degrees C for 3 hours, air cooled Material standard:according to ISO 10474-3.1.B,JIS G 0415-3.1.B Depth:100µm Width target value:0...
TMTeck Instrument Co., Ltd
|
rigid cellular plastic shear strength and shear modulus tensile testing machine ISO 1922 test speed 1mm/min
![]() |
...testing machine 1.introduction This tensile testing machine is to determine the shear strength of rigid cellular plastics by applying a shear stress to a test specimen of defined shape by means of metal supports bonded to the specimen and it can also determine shear modulus of rigid cellular plastics. 2. test specimen size a) length:250mm b) width:50mm c) thickness:25mm 3. test method ISO......
Jinan Wang Te Bei Equipment Co., Ltd.
|
5kg Manual Crease Recovery Tester , Fabric Measuring Equipment BS / ISO / AATCC Test Method
![]() |
... in a loading device for a pre-determined time using a weight suitable for the test method specified (BS/ISO/AATCC). After transferring the specimen to the clamp of the tester, the specimen is allowed to recover and the angle of recovery recorded. Comes...
TESTEX INSTRUMENT LTD
|
IEC 60695-10-2 2014 Ball Pressure Tester With Test Specimen Support Hot Deformation Capacity
![]() |
... components and plastic. Trial is that the sample placed on the platform of inside constant temperature under 125±2Degree, coupled with the ball-side of tester suppressing the specimen, remove the...
KingPo Technology Development Limited
|
30t universal tensile tester for tensile test results and tensile test specimen
![]() |
...non metal material. This universal testing machine can test plastic, rubber, thread, wood, alloy, PVC, spring, electrical wire and cable, composite, profiled bar, waterproof roll, etc. Add relative optional accessories, this universal testing machine is...
jinan hardness STING EQUIPMENT CO., LTD
|
CDV CPV Ag Dog Test Kits Combo Test Specimen Secretions Feces Vomit
![]() |
CDV +CPV Ag Combo Test Specimen: Secretions+Feces/Vomit VETERINARY Canine Range CDV+CPV Antigen Combo Rapid Test Cassette is a lateral flow immunochromatographic assay for the qualitative detection of Canine Distemper Virus (CDV Ag) in dog’s nasal/ocular ......
Hangzhou AllTest Biotech CO.,LTD
|
Single Use Sampling Test Specimen Collection Tube Flocked Nasal Swab
![]() |
... turn it to exit, then swab the other nostril with another swab. b)Throat swab:Wipe bilateral tonsils and posterior pharyngeal wall with swab. c)Tissue specimen:Rub and collect tissue specimen with a swab. d)Sampling of...
Sichuan Shine RC Medical Technology Co. ,ltd
|