80mm Length IEC 60335 Test Finger Blender Probe
|
... Finger Probe Blender Probe Nylon Handle Stainless steel Probe Standard: IEC 60335-2-14 ‘Household and similar electrical appliances - Safety - Part 1: General requirements’ clause 20.102. Standard description: Blades of hand-held blenders shall be ......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
80mm Blunt Probe As Per IEC 60950 IEC 60065 IEC 62368-1 For Testing TNT Circuit
|
...Probe as Per IEC60950, IEC60065 and IEC62368-1 for Testing TNT Circuit 1. Introduction The blunt probe is designed according to IEC60950 figure 2C, IEC60065 figure B1, IEC62151 figure 3, UL6500 figure B.1, IEC62368-1 figure V.3. It is applied to check if the exposed parts of TNT circuits of information technology equipment has adequate protection. 2. Specification Length of the probe 80mm±0.2mm Radius of probe R6＋0.05mm Diameter of probe...
Pego Electronics (Yi Chun) Company Limited
|
Φ8㎜ IEC Safety Blender Test Finger Probe Blade Of Hand-Held Stirrer
|
... Product information: The blender probe complies with IEC60335-2-14 CI.20.102. It is used to test whether the blade of hand-held stirrer is completely concealed from above and flat ......
Dongguan Kingpo Technology Limited
|
UL 982 Figure 30.2 Blender Accessibility Probe For Blender Container Abuse Test
|
... A blender container shall not break or crack during normal use. 30.4.4.2 A blender employing a thermoplastic container shall be subjected to the test outlined in 30.4.4.4– 30.4.4.7. 30.4.4.3 A blender employing a glass container shall be subjected to...
KingPo Technology Development Limited
|
IEC Safety Blender Test Finger Probe IEC60335-2-14 CI.20.102
|
... from above and flat surface can be touched when the blade is rotating. The test is achieved by applying a cylindrical rod from any position where the angle between the probe and the blade above is 45°to touch the blade. During the test, it shall not be...
Guangzhou HongCe Equipment Co., Ltd.
|
Stainless Steel Blender Test Probe HT-I24
|
Blender Probe HT-I24 Standard:IEC60335-2-14 CI.20.102. Application:It is used to test whether the blade of hand-held stirrer is completely concealed from above and flat surface can be touched when the blade is rotating. Test sample:Handheld blender. Feature:The test is achieved by applying a cylindrical rod from any position where the angle between the probe......
shanghai kerang technology co ltd
|
IEC60884 IEC61032 Socket protective test probe 14AB Safety Test Probe
|
...probe 14AB BND-14AB Technical Parameters: 1, Test Probe Length:80mm 2,Probe Diameter:1.0mm 3,Material:The handle is made of nylon, tip is made of hardened steel 4,Standard: IEC60884 ,IEC61032 Fig.10 1 Product Explanation The socket protection door test needle probe......
HongKong Bonad Technology Limited
|
φ40 Mm Cylinder Rod Test Probe With Hemispherical End IEC60335-2-14
|
...blenders φ40 mm Cylinder Rod Test Probe Standard and Application: The φ40mm cylinder rod meets the standard requirements of IEC 60335-2-14 Clause 20.103. It is used to verify the hand-held blenders other than hand-held food mixers provided with a blender......
Sinuo Testing Equipment Co. , Limited
|
Standard Neurology IONM Monopolar Ball Tip Stimulation Probe
|
... cases for the recording of electrophysiological signals. Stimulating Probe Specification : Type Code Remark Monopolar(shield shaft) REP-1.5N-04 Probe shaft length:80MM-120MM Tip diameter :0.2MM-3.0MM Cable length :1000MM-2500MM Stimulating Probe Show...
Suzhou Repusi Electronics Co.,Ltd.
|
Test Finger Probe with 125mm * 80mm Circular Stop Face
|
Test Finger Probe with 125mm * 80mm Circular Stop Face The test probe is carried out with a test probes similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125mm and thickness of 80mm instead of the non-circular ......
HK LEE HING INDUSTRY CO., LIMITED
|
Submit your “80mm blender probe” inquiry in a minute :