5KN 10KN Electronic Universal Testing Machine For Metal Bending Test
|
... tensile test Metal/Plastic bending test Wire / sheet tensile / compression/tearing/bending test Scope: Tape, Automotive, ceramic, composite material, construction, medical/food equipment, metal, paper, plastic, rubber, textile, wood, communication, etc...
Infinity Machine International Inc.
|
5KN Power Cord Tester Vertical Single Column Digital Tensile Strength Test Machine
|
... tape, rubber, resin, plastic, metal rod, metal pipe, metal sheet and metal profile, and composite material. It is also suitable for the tensile test of finished products when matched with fixtures., Compression, peeling, shearing, bending (folding),...
Chenxin Automation Equipment(Guangzhou) Co., Ltd.
|
Gantry Type Tensile Test Equipment 5kN Compression Bending Test
|
... materials such as rubber, plastics, wires and cables, textiles, waterproof materials, non-woven fabrics, metal wires, metal foils, metal plates and metal rods. It can also be used with special fixtures. It is suitable for tensile, compression, peeling,...
Sinuo Testing Equipment Co. , Limited
|
500N 1KN 2KN 5KN Benchtop Tensile Tester Adjustable Speed For Plastic Film Rubber And Wire Cable Tensile Test
|
..., plastic films, rubber, wires and cables, and waterproof rolls. Equipped with different fixtures, it can perform tests including tension, compression, bending, peeling, displacement,...
Shanghai Zealtal Instrument Co., Ltd
|
Metal Wire Repeated Bending Testing Machine Cables Repeated Bending Tester Electrical Wires Reverse Flexure Testing Chamber
|
Metal Wire Repeated Bending Testing Machine Cables Repeated Bending Tester Electrical Wires Reverse Flexure Testing Chamber I. Main Purpose and Application Scope The metal wire repeated bending tester is primarily designed for repeated bending tests on metal wires with diameters up to 10 mm. This machine has been developed in strict accordance with GB/T238-2013 "Test Method for Repeated Bending of Metallic......
DONGGUAN LONROY EQUIPMENT CO LTD
|
Panasonic Servo Motor Tensile Strength Tester Metal Bending Test Single Column
|
..., plastics, textiles, wire and cable, composite materials, leather, waterproof membrane, non-woven, geotextile fabric, paper and other non-metallic materials and metal wire, metal foil, sheet metal and metal rods timber and other...
Guangdong Haida Equipment Co., Ltd.
|
Qty-32 Cylindrical Mandrel Bend Tester / Paint Film Cylindrical Bending Test Instrument
|
...Bend Tester Professional paint film cylindrical bending test instrument for evaluating coating flexibility on metal substrates. Product Overview The QTY-32 Paint Film Cylindrical Mandrel Bend Tester is designed for testing the flexibility and bending resistance of powder coatings and liquid paints on various metal......
Cangzhou Astar Machinery Co., Ltd.
|
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2
|
... tests shall be tested as follows: Pins of assembled plugs shall be tested by clamping the plug in a rigid holding block and applying a bending force, as shown in Figure 2.8, to the pin under test. The pins shall be...
KingPo Technology Development Limited
|
IEC 60884-1 Bending Test Apparatus bend tester without screw thread
|
...Bending Test Apparatus bend tester without screw thread Production introduction: According to the provisions of IEC 60884-1, GB2099.0-1996,12.3.12 provisions of the non threaded terminal bending testing machine. The test machine without screw thread is mainly used for the bending......
Guangzhou HongCe Equipment Co., Ltd.
|
REFOND Tensile Testing Machine 5KN Universal Strength Tester ASTM D1683
|
...Tester 5KN Product Specifications: Model No. US1K US5K Capacity 1kN/100kg/200lbf 5kN/500kg/1000lbf Column Distance (mm) 0 0 Max. Crosshead Travel (Excluding Grips) 750 750 Load Cells 10N, 50N, 100N, 200N, 250N, 500N, 1kN 10N, 50N, 100N, 200N, 250N, 500N, 1kN, 2kN, 2.5kN, 5kN......
Refond Equipment Co., Ltd.
|