1.0mm Through Hole PCB Board Assembly FR4 Mobile Phone
|
FR-4 Mobile Phone Through Hole PCB Board The FR-4 Mobile Phone Through Hole PCB Board is the rigidity PCB circuit board developed and produced by Shenzhen Quanhong Electronics Co., Ltd. the HDI board is made of FR-4 material, surface gold deposition and ......
Quanhong FASTPCB
|
Customized 1.0mm Quick Turn PCB Boards Fabrication Immersion Gold 2U
|
...0mm Quick Turn PCB Boards Fabrication Immersion Gold 2U PCB Manufacturer Customized Black PCB Fabrication Circuit Boards Min. hole size: 0.15mm(need to review the board if smaller than 0.15 mm ) HDI Min drill hole capability: 0.08-0.10MM PCB track/gap capability: 3mil(0.075mm) PCB......
Huashengxin Circuit Limited
|
PTFE High Frequency PCB Built On 3.0mm F4B RF PCB Board for Patch Antenna
|
...PCB Built On 3.0mm F4B RF PCB Board for Patch Antenna (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) General description This is a type of double sided high frequency PCB built on 3.0mm PTFE substrate for the application of Patch Antenna. Basic specifications Base material: F4B 3.0mm thick Dielectric constant: 2.55+/-0.02 Layer count: 2 layers Type: Through holes...
Shenzhen Bicheng Electronics Technology Co., Ltd
|
Printed Circuit Board Components Thermostat Through Hole PCB Board Assembly
|
...-4.0mm Board Thickness Tolerance ±10% Cooper thickness 0.5 OZ-3OZ (18 um-385 um) Copper Plating Hole 18-40 um Impedance Control ±10% Warp&Twist 0.70% Peelable 0.012"(0.3mm)-0.02’(0.5mm) Images ......
Shenzhen Jingbang Technology Co. , Ltd
|
Custom Single Layer PCB Fabrication 0.2mm-6.0mm 6 Layer PCB Board
|
6 Layer Custom Single Layer And Multilayer PCB Fabrication Basic information: Size:11*7CM Layer:6 Surface finish: Immersion gold Thickness:1.6mm Copper weight:1.5OZ outer Color:Blue solder mask PCB Classify: Rigid PCB Single-sided, double-sided & multi-......
ONESEINE TECHNOLOGY CO.,LTD
|
Four Layer Half Hole PCB Printed Circuit Board Finished Thickness 1.0MM
|
... Unit Size: 97mm*97mm/25up Solder Mask: Green Surface Treatment: ENIG Special Treatment: Half Plated Holes Application: GPS Module Capabilities: Item Capability Layer Count 1-24 Layers Board Thickness 0.1mm-6.0mm Finished Board Max Size 700mm*...
Witgain Technology Ltd
|
6 Layer Half Plated Hole PCB Bluetooth Module 1.0MM Board Thickness Cusomized
|
... Lind Space&Width: 3/3mil 6 Application Area: Bluetooth Module Our Capabilities: NO Item Capability 1 Layer Count 1-24 Layers 2 Board Thickness 0.1mm-6.0mm 3 Finished Board Max Size 700mm*800mm 4...
Witgain Technology Limited
|
F4B High Frequency PCB Built On 3.0mm RF PCB Board for Patch Antenna
|
...PCB Built On 3.0mm F4B RF PCB Board for Patch Antenna (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) General description This is a type of double sided high frequency PCB built on 3.0mm PTFE substrate for the application of Patch Antenna. Basic specifications Base material: F4B 3.0mm thick Dielectric constant: 2.55+/-0.02 Layer count: 2 layers Type: Through holes...
Bicheng Electronics Technology Co., Ltd
|
Square HASL LED Ceiling Light PCB Board SMD SMT DIP Component Assembly
|
...PCB Board SMD SMT DIP Component Assembly 12v led light circuit board square pcb board led for ceiling light Led panel pcb board custom 12V 94v0 led pcb board rock light Base Material FR-4 /Aluminum /CEM-1 Layers 1-22 Finised inner/outer copper thickness 1-6OZ Finished board thickness 0.2-7.0mm Min hole size Mechanical hole: 0.15mm Laser hole......
Shenzhen Yizhuo Electronics Co., Ltd
|
0.5-3.0mm Thickness SMD Aluminum PCB Board , FR4+AL PCB Single Layer Board
|
... (smt&thru-hole), conformal coating, potting and encapsulations, AOI/X-Ray PCBA testing, IC programming, box building service, etc. The PCBA used in ......
Linked Electronics Co., Limited
|