9120/15/38 Crane Rail Clamp Product Introduction
9120/15/38 Clamp products are used in crane rail fixing systems.
This clamp overcomes the loosening of the plate, reduced wheel
pressure and wheel wheel problems in traditional hard rail fixing
systems, while reducing noise. This clamp can reliably withstand
the lateral force from the crane wheels.
9120/15/38 Crane Rail Clamp Product Specification
| Product | Type | Application | Rubber Tongue Size | Weight
(Piece) | Horizontal Distance |
| Crane Rail Clips | 9120/15/38 | With rubber pad | Depth 14mm | 1.51kg | 15mm |
| Crane Rail Clips | 9120/15/38 | Without rubber pad | Depth 21mm | 1.52kg | 15mm |
9120/15/38 Crane Rail Clamp Product Feature and Application
The clamp can be used for various cranes with or without guide
wheels. It is automatically locked by the wedge structure and the
tilting of the upper and lower surfaces of the mutually meshing
clamp. The control of the tolerance of the rail and the crane beam
is not a problem. The prestressing of the clamp base and the
lasting contact between the rail and the base are guaranteed.
Effectively reduce noise and improve the working environment.
When the clamp is used, an elastic composite rubber pad is set
between the track and the crane beam, which not only increases the
friction between them, making it difficult for the rail to move,
but also eliminates or reduces the uneven gap between the track and
the crane beam along the entire length of the track. Thereby
improving the stress condition of the pressure plate bolt.
The clamp component is made of low-alloy high-strength structural
steel. The bolt is M20*48mm, 8.8-grade high-strength bolt, the
tightening torque is: 256N.m, and the maximum lateral force it can
withstand is: 120KN.
About Us
GNEE Rail is a large integrated company specializing in the design,
development, production, installation and technical services of
rail fasteners. Our company has introduced domestic advanced die
forging production lines and supporting machining equipment,
integrating design, manufacturing, die forging and machining. The
main equipment includes high-energy screw presses, medium-frequency
induction furnaces, CNC milling machines, wire cutting machines,
EDM machines, and a variety of machining equipment. The products
are widely used in ports, docks, shipbuilding, railways, coal,
mining, coking, electricity, metallurgy and other industries.
