Cat5e FTP 24AWG Solid 100% Copper Blue High Speed Network Cable
1000FT
Description:
> It provides 100MHz bandwidth within 90 meters, and the typical
application rate is 100Mbps.
> This product is used in shielded and confidential systems that
have certain requirements for electromagnetic interference, and is
used for indoor horizontal work area wiring and indoor LAN wiring.
> The product uses high-quality oxygen-free copper as the
transmission conductor, and has reliable and excellent electrical
transmission performance, reaching and greatly exceeding the
indicators of the Category 5e system.
> F/UTP shielded cables have strong anti-shielding interference
capabilities and can be used in environments that require
resistance to electromagnetic interference. The overall shielding
system has certain signal shielding and confidentiality.
· Bare solid copper conductor
· 100MHz
· Aluminum foil shielding
· Jacket PVC, 60P, -20~75℃
· Rate temperature:60℃ 75℃
· InstallationTemperature: -30℃-+50℃
· CompliestoANSI/TIA-568-B.2&IS0/EC11801
· CE, RoHS, TUV, UL compliant, CPR, ETL, RCM, ISO9001
Specifications:
| Product Description: Cat 5e F/UTP 4 X 2 X 24AWG |
| Construction Item Description | Electrical Property |
Conductor |
Material | Bare Solid Copper(elongation: 19 ~ 24%) | Conductor Resistance at 20°C | ≤ 9.5 Ω / 100m |
| OD | 24 AWG | Resistance unbalance within a pair | ≤ 2% |
Insulation |
Material |
HDPE 8303 | Insulation Resistance at 20°C after 2min of electrification under a
DC voltage between 100 & 500V |
>1500 MΩ / 100m |
| OD | 0.90 ± 0.02 mm | Mutual capacitance | 5600 pF / 100m MAX |
| Average THK | 0.20 mm | Capacitance unbalance pair to ground at 800Hz or 1 kHz | ≤ 160 pF / 100m |
Color | 1p: white + 2 blue stripes & blue | Characteristic impedance at 100MHz | 100 ± 15 Ω |
| 2p: white + 2 orange stripes & orange | Dielectric Strength Test Voltage (cd/cd,cd/screen): 1.00KV DC or 0.7 KV AC for 1 min |
No breakdown |
| 3p: white + 2 green stripes & green | Mechanical Property |
| 4p: white + 2 brown stripes & brown |
insulation | elongation before aging | ≥ 300% |
Pair Twist |
Lay & Direction | 1p: S=20.0 mm (28%) | tensile strength before aging | ≥12 MPa |
| 2p: S=17.5 mm (24%)) | elongation after aging | ≥ 150 % |
| 3p: S=22.0 mm (32%) | tensile strength after aging | ≥10.5 MPa |
| 4p: S=15.5 mm (21%) |
jacket | elongation before aging | ≥ 150 % |
| OD | / | tensile strength before aging | ≥ 13.5 MPa |
Inner Assemble | Lay | S=90 ± 5 mm | elongation after aging | ≥ 125 % |
| Direction | according to the drawing | tensile strength after aging | ≥ 12.5 MPa |
| Filler | / | Packing |
| OD | / | Drum | NA |
| Filler | Ripcord | 300D | Master Carton | NA |
| Drain Wire | Tinned Copper |
|
Outside Shield | Shield | Shield |
| Construction | / |
| Material | Polyester/Aluminium (PET/ALU) |
| Coverage | ≥ 115% |
Jacket | Material | PVC, 60P, -20~75℃ |
| Hardness | 81 ± 3 |
| OD | 4.8 ± 0.2 |
| Average THK | 0.45 ~ 0.55 |
Color | according to the customer's requirements |
| Marking Color | black |
| Marking | according to the customer's requirements |
| Construction Item Description |
Conductor | Construction | AWG | 24 |
| Material | / | Bare Solid Copper |
Insulation | Material | / | HDPE 8303 |
| Proportion | g/cm³ | 0.97 |
| Outside Diameter | mm | 0.90 ± 0.02 |
| Average Thickness | mm | 0.20 |
Color |
/ | 1p: blue stripe + white + blue stripe & blue |
| 2p: orange stripe + white + orange stripe & orange |
| 3p: green stripe + white + green stripe & green |
| 4p: brown stripe + white + brown stripe & brown |
Pair Twist |
Lay & Direction |
/ | 1p: S=20.0 mm (28%) |
| 2p: S=17.5 mm (24%) |
| 3p: S=22.0 mm (32%) |
| 4p: S=15.5 mm (21%) |
| Inner Assemble | Lay & Direction | / | S=90 ± 5 mm |
Filler | Ripcord | / | 300D |
| Drain Wire | / | Tinned Copper |
Outside Shield | Shield | / | Shield |
| Construction | mm | / |
| Material | / | Polyester/Aluminium (PET/ALU) |
| Coverage | % | ≥ 115% |
Jacket | Material | / | PVC , 60P, -20 ~ 75℃ |
| Hardness | A | 81 ± 3 |
| Outside Diameter | mm | 4.8 ± 0.2 |
| Average Thickness | mm | 0.45 ~ 0.55 |
| Color | / | according to the customer’s requirements |
| Marking Color | / | Black |
| Marking | Jacket | / | according to the customer’s requirements |
| Electrical Properties |
| Conductor Resistance at 20°C | NF EN 50289-1-2 / IEC 60189-1 | ≤ 9.5 Ω / 100m |
| Resistance unbalance within a pair | NF EN 50289-1-2/ IEC 60708 | ≤ 2% |
Dielectric Strength Test Voltage (cd/cd): 1.00KV DC or 0.7 KV AC for 1 min Test Voltage
(cd/screen): 1.00KV DC or 0.7 KV AC for 1 min |
NF EN 50289-1-3 / IEC 61196-1-105 |
No breakdown |
| Insulation Resistance at 20°C after 2min of electrification under a
DC voltage between 100 & 500V |
NF EN 50289-1-4 / IEC 60885-1 |
>1500 MΩ / 100m |
| Mutual capacitance | NF EN 50289-1-5 /IEC 60189-1 | 5600pF / 100m MAX |
| Capacitance unbalance pair to ground at 800Hz or 1 kHz | NF EN 50289-1-5 / IEC 60189-1 | ≤ 160 pF / 100m |
| Characteristic impedance at 100MHz | NF EN 50289-1-11/ IEC 61156-1 | 100 ± 15 Ω |
| Spark Test | UL444 | 2000 ± 250VOC |
| Transmission Properties |
| CAT5e ANSI/TIA-568.2-D; IEC 61156-6; YD/T1019-2013 |
No. |
Frequency |
Attenuation (Max) | Propagation Delay (MAX) | Propagation Delay Skew (MAX) |
Return Loss (Min) |
NEXT (Min) |
PS NEXT (Min) |
EL-FEXT (Min) |
PS EL-FEXT (Min) |
| MHz | dB/100m | ns/100m | ns/100m | dB(on 100m) | dB(on 100m) | dB(on 100m) | dB(on 100m) | dB(on 100m) |
| 1 | 4 | 4.05 | 552 | 45 | 23.01 | 56.27 | 53.27 | 51.96 | 48.96 |
| 2 | 8 | 5.77 | 546.73 | 45 | 24.52 | 51.75 | 48.75 | 45.94 | 42.94 |
| 3 | 10 | 6.47 | 545.38 | 45 | 25 | 50.3 | 47.3 | 44 | 41 |
| 4 | 16 | 8.25 | 543 | 45 | 25 | 47.24 | 44.24 | 39.92 | 36.92 |
| 5 | 20 | 9.27 | 542.05 | 45 | 25 | 45.78 | 42.78 | 37.98 | 34.98 |
| 6 | 25 | 10.42 | 541.2 | 45 | 24.32 | 44.33 | 41.33 | 36.04 | 33.04 |
| 7 | 31.25 | 11.72 | 540.44 | 45 | 23.64 | 42.88 | 39.88 | 34.1 | 31.1 |
| 8 | 50 | 15.07 | 539.09 | 45 | 22.21 | 39.82 | 36.82 | 30.02 | 27.02 |
| 9 | 62.5 | 16.99 | 538.55 | 45 | 21.54 | 38.36 | 35.36 | 28.08 | 25.08 |
| 10 | 100 | 21.98 | 537.6 | 45 | 20.11 | 35.3 | 32.3 | 24 | 21 |
| 11 | | | | | | | | | |
| 12 | | | | | | | | | |
| 13 | | | | | | | | | |
| 14 | | | | | | | | | |
| Remarks: ＊ are the reference values |
Notices:
1. Open the packaging and carefully inspect the product for any
flattening or damage to the outer skin.
2. During construction, please strictly follow the wiring standards
and do not bundle or excessively bend the network cables.
3. When making RJ45 network cable crystal heads, please follow the
T568B or T568A standards to ensure the correct wiring sequence and
avoid problems such as line disconnection or unstable network
connections.
4. The wiring distance of a single network cable should not exceed
100 meters as much as possible to ensure optimal transmission
performance.
5. When installing Category 5e FTP network cables, it is necessary
to ensure that both ends of the shielded network cable are
grounded.
Applications:
The Cat5e FTP Network cable has become an indispensable part of
modern network communication due to its excellent performance and
wide range of applications. Whether in enterprise LAN construction,
data center management, smart home security, or in building
automation, multimedia entertainment, remote education, and remote
work, Cat5e FTP cable play a crucial role, providing strong support
for the digital life of modern society.
FAQ
UL/CE/RoHS/ETL/CPR Certificate Shielded Lan cable Cat5e F / UTP
24AWG Extend To 350MHz Bare Solid Copper
Q1. Can I order samples of Lan cables?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: 3-5 days for Sample preparing ,15-45 days for mass production.
Q3. Do you have a minimum order quantity limit for network cable
orders?
A: Low MOQ, 1000PCS for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by sea, which usually takes about 7 days to
arrive.
Q5. How to proceed an order for network cable?
A: 1. Firstly let us know your requirements or application.
2. Secondly We quote according to your requirements or our
suggestions.
3. Thirdly customer confirms the samples and places deposit for
formal order.
4. Fourthly We arrange the production.
Q6.Is it OK to print my logo on network cable product?
A: Yes. Please inform us formally before our production.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 10 years warranty to our products.
Q8: How do you handle after-sales issues?
A: Our after-sales team provides 24-hour after-sales service. When
customers provide feedback on problems, we will remedy them as soon
as possible and send them to you, or we can discuss solutions based
on the actual situation to make you 100% satisfied.
