ACA616T Precision MEMS Tilt Sensor Inclinometer for Facility Angle
Control
Product Description:
ACA616T/ACA626T-CAN2.0A is a full-temperature compensated
high-precision single / dual-axis inclinometer developed by RION
Technology on the basis of high-precision inclination platform. Its
good temperature stability can be used in a wide temperature
environment of -40~85℃ In addition, the system has a built-in
high-precision 24it A/D converter, and through a 5-level conversion
algorithm, it can measure the tilt and pitch angle of the sensor
output relative to the horizontal plane. Output protocol CAN2.0A.
The characteristics of non-contact installation make this product
have good system integration. Just fix the sensor on the surface of
the measured object with a screwdriver, the attitude and
inclination of the object can be automatically calculated. It has
strong ability to withstand shock and vibration, and has a great
competitive advantage among domestic counterparts. It is
specifically aimed at the industrial fields that high-end users
require.
Features:
- Measuring Range :±1～±60° optional
- Wide voltage input: 9～36V
- IP67 protection grade
- Wide temperature working: -40～+85℃
- Water-proof air-plug
- High Resolution: 0.001°
Technical Parameters:
| ACA616T/626T-C2 | CONDITIONS | PARAMETERS | UNIT |
| Measure range | | ±10 | ±30 | ±60 | ° |
| Measure axis | | X/XY | X/XY | X/XY | AXIS |
| Resolution | | 0.001 | 0.001 | 0.001 | ° |
| Measure accuracy | @25℃ | 0.003 | 0.01 | 0.02 | °(RMS) |
| Long term stability | | 0.01 | 0.02 | 0.03 | ° |
| Zero Temp. coefficient | -40~+85℃ | ±0.0004 | ±0.0004 | ±0.0004 | °/℃ |
| Sensitivity temp-coeffi | -40~+85℃ | ≤100 | ≤100 | ≤100 | ppm/℃ |
| Power on time | | 0.5 | 0.5 | 0.5 | S |
| Response frequency | 20Hz |
| Output rate | 20Hz |
| Interface type | CAN 2.0A |
| EMC | According to EN61000 and GBT17626 |
| MTBF | ≥98000 hours/times |
| Insulation Resistance | ≥100MΩ |
| Shockproof | 100g@11ms,3 Axial Direction (Half Sinusoid) |
| Anti-vibration | 10grms,10～1000Hz |
| Protection grade | IP67 |
| Cables | Standard configuration: 2m length, wear-resistant, wide
temperature, shielded cable 5P * 5.7mm aviation connector |
| Weight | 235g(without cable) |
Applications:
★ Laser equipment position
★ Medical facilities angle control
★ Underground drill posture navigation
★ Railway gauging rule , gauge equipment leveling
★ Precise machine tool level control
★ Geological equipment inclined monitoring
PRODUCTION INSTALLATION NOTES :
Please follow the correct way to install tilt sensor, incorrect
installation can cause measurement errors, with particular
attention to the "surface", "line" :1) The Sensor mounting surface
and the measured surface must be fixed closely, smoothly,
stability,if mounting surface uneven likely to cause the sensor to
measure the angle error.
2) The sensor axis and the measured axis must be parallel ,the two
axes do not produce the angle as much as possible.
MEASURING DIRECTIONS :
The installation must guarantee the product bottom is parallel to
measured face,and reduce the influence of dynamic and acceleration
to the sensor. This product can be installed horizontally or
mounted vertically (mounted vertically selection must confirm
before production ), for installation please refer to the following
scheme.
