Sign In | Join Free | My himfr.com
Home > Refrigeration & Heat Exchange Equipment >

Non Ablation Thermal Negative CTP Printing Plates 0.15mm Thickness

    Buy cheap Non Ablation Thermal Negative CTP Printing Plates 0.15mm Thickness from wholesalers
     
    Buy cheap Non Ablation Thermal Negative CTP Printing Plates 0.15mm Thickness from wholesalers
    • Buy cheap Non Ablation Thermal Negative CTP Printing Plates 0.15mm Thickness from wholesalers
    • Buy cheap Non Ablation Thermal Negative CTP Printing Plates 0.15mm Thickness from wholesalers
    • Buy cheap Non Ablation Thermal Negative CTP Printing Plates 0.15mm Thickness from wholesalers
    • Buy cheap Non Ablation Thermal Negative CTP Printing Plates 0.15mm Thickness from wholesalers
    • Buy cheap Non Ablation Thermal Negative CTP Printing Plates 0.15mm Thickness from wholesalers

    Non Ablation Thermal Negative CTP Printing Plates 0.15mm Thickness

    Ask Lasest Price
    Brand Name : EcooGraphix
    Model Number : ECOO-G
    Certification : ISO9000, CE
    Price : Negotiable
    Payment Terms : L/C, T/T
    Supply Ability : 300,000 Sqm/Year
    Delivery Time : 45 Days
    • Product Details
    • Company Profile

    Non Ablation Thermal Negative CTP Printing Plates 0.15mm Thickness


    Non-ablation Thermal Negative CTP Offset Printing Plate


    Characteristics


    ECOO-G is a double layer, and the emulsion layer will not dissolve in water,
    so it will not integrate into the fountain solution;
    while the protection layer is well water-soluble,
    and it will be easily dissolved into the fountain solution.




    Specification


    Model ECOO-G

    Plate Type Thermal-negative type

    Application High-grade commercial and newspaper printing

    Substrate Electrolyte graining and Anodized AL substrate

    Thickness 0.15mm/ 0.30mm

    Maximum short grain width Maximum width 1280 mm

    Spectrum scope 800-850 nm

    Photosensitive wavelength 830 nm

    Platesetter Various dominant thermal platesetters in the market

    Coating color Grey

    Low-energy imaging 130-150 mj/cm²

    The period of latent image stabilization ≤ 7 days

    Recommended screen method 1-99% @200 LPI AM or 20μm FM or mixture

    The paper number of start-ups < 50 sheets

    Safety light 4 hours under yellow light; 1 hour under fluorescent lamp;
    Direct exposure under natural light is safe but not recommended.

    Processing Without processing, directly on the press

    Run Length 100,000 impressions; Actual run length depends on printing conditions

    Shelf life 12 months under recommended condition

    Transportation Packed in seal and stored using prevention from light,
    moisture, overheating, and high humidity

    Storage Recommended condition: 18ºC-24ºC, 40%-50% RH.
    ModelECOO-G
    Plate TypeThermal-negative type
    ApplicationHigh-grade commercial and newspaper printing
    SubstrateElectrolyte graining and Anodized AL substrate
    Thickness0.15mm/ 0.30mm
    Maximum short grain widthMaximum width 1280 mm
    Spectrum scope800-850 nm
    Photosensitive wavelength830 nm
    PlatesetterVarious dominant thermal platesetters in the market
    Coating colorGrey
    Low-energy imaging130-150 MJ/cm²
    The period of latent image stabilization≤ 7 days
    Recommended screen method1-99% @200 LPI AM or 20μm FM or mixture
    The paper number of start-up< 50 sheets
    Safety light4 hours under yellow light; 1 hour under fluorescent lamp;
    Direct exposure under natural light is safe but not recommended.
    ProcessingWithout processing, directly on the press
    Run Length100,000 impressions;
    Actual run length depends on printing conditions
    Shelf life12 months under recommended condition
    TransportationPacked in seal and stored using prevention
    from light, moisture, overheating, and high humidity
    StorageRecommended condition: 18ºC-24ºC, 40%-50% RH.


    Applied Parameters in Imaging Device

    CTP model
    Data
    Kodak
    trendsetters
    LOTTEM 400(TH1.7)MAGNUS 400Screen 8600S
    Laser power15-17W300-320mw19.5-21.5W80-90 %
    Drum speed250-300rpm850-900rpm400-450rpm800-900rpm
    ResolutionCustomizedCustomizedCustomizedCustomized
    Parameter that needs set upFocus/ ZoomFocus/ ZoomFocus/ ZoomFocus/ Zoom

    *Note: Higher exposure energy will make the image contrast clear, and benefit to
    the plate run length; while over high/low exposure energy will affect the image quality negatively.


    ♦ Application



    EcooGraphix ECOO-G is a new, environmentally friendly, Development On Press CTP plate.
    It can be run directly on a printing press after imaging, without a need for chemical processing.


    Recommended application to press procedures of ECOO-G:
    1] Clean all the inks on the blanket;
    2] Start the press machine, apply the water roller, and run for 30-40 seconds;
    3] Apply the ink rollers 20-30 seconds;
    4] Apply the paper and start print.

    Remark: If steps 2 and 3 are longer, the paper will be wasted less.




    ♠ Success Case


    Producing And Packaging



    From production to delivery, we make every detail very carefully to guarantee good product quality and service to customers.

    Certificates

    FAQ

    Q1: Can I get the sample?
    A: We are very glad to provide some samples for you to test.
    We usually provide 5-15 pieces of plates for free,
    but sincerely hope to get your kind support for the air courier freight.
    This cost can be returned to you in your first order.


    Q2: What is the cost for the CTP plate sample freight?
    A: The air freight depends on the packing size and weight, and the delivery destination.
    Or you can arrange the pick-up service from your local agent.


    Q3: How long can the sample be ready?
    A: It usually takes about 3 days to prepare the sample.


    Q4: Can I visit your factory?
    A: You are warmly welcome to visit our factory! Our company is in Hangzhou City,
    which is about 1.5 hours by train from Shanghai.


    Q5: How many square meters of CTP plates can feed one 20' container?
    A: About 20000-25000sqm.


    Q6: Can I take my brand and label on the packing?
    A: Yes, we can provide the OEM with the customer's brand and label.
    Quality Non Ablation Thermal Negative CTP Printing Plates 0.15mm Thickness for sale
    • Haven't found right suppliers
    • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
    • And this service is free of charge.
    • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
    Submit Buying Request
    Send your message to this supplier
    *From:
    Your email address is incorrect!
    *Subject:
    Your subject must be between 10-255 characters!
    *Message:
    For the best results, we recommend including the following details:
    • --Self introduction
    • --Required specifications
    • --Inquire about price/MOQ
    Your message must be between 20-3,000
    Yes! I would like your verified suppliers matching service!
    Send your message to this supplier
     
    *From:
    *To: Hangzhou Ecoographix Digital Technology Co., Ltd.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Explore more CTP Printing Plates products from this supplier
    Find Similar Products By Category:
    Inquiry Cart 0