Sonoscape L741 Ultrasound Linear Array Probe
for SSI-8000, SSI-6000, SSI-5000, and S8 series ultrasound systems
► Brief Introduction of Sonoscape L741 Ultrasound Linear Array Probe for SSI-8000, SSI-6000, SSI-5000, and S8 series ultrasound systems
The Sonoscape L741 Ultrasound Linear Array Probe is designed for
use with the S6 Color Doppler Ultrasound System. It has 128
transducer elements and a frequency range of 5.0 - 12.0 MHz. It is
commonly used for vascular, small parts, and musculoskeletal
applications
► Features of Sonoscape L741 Ultrasound Linear Array Probe for SSI-8000, SSI-6000, SSI-5000, and S8 series ultrasound systems
Signal processing technology: Improves image clarity and
resolution.
Ergonomic design: Reduces operator fatigue over long periods of
time.
Easy to clean and disinfect: Maintains high hygiene standards.
Safety-friendly: Minimizes exposure to ultrasound radiation.
Wide compatibility: Seamlessly integrates with SonoScape’s wide
range of ultrasound systems.
Frequency flexibility: Adjust settings to suit your inspection
needs.
► Specification of Sonoscape L741 Ultrasound Linear Array Probe for SSI-8000, SSI-6000, SSI-5000, and S8 series ultrasound systems
| Product Name | Sonoscape L741 Ultrasound Linear Array Probe for E Series
Ultrasounds
|
| Brand | Sonoscape |
| Model Number | L741 |
| Compatible with | Sonoscape SSI-8000, SSI-6000, SSI-5000, and S8 series ultrasound
systems
|
| MOQ | One piece |
| Warranty | 90 days |
| Type | Linear array |
| Applications | Vascular, Small parts, Musculoskeletal
|
| Scan width | max. 46mm |
Frequency range
| 5.0 - 12.0 MHz |
► Connecting probes
It is not necessary to turn off the system to connect or disconnect
the probe.
Before connecting or disconnecting the probe, ensure that it is not
actively scanning. You must do one of the following:
• Activate Stop mode with the Freeze key.
• Activate Ready mode with the MENU key.
If the probe is disconnected during an active scan, a software
error may occur. In this case, restart the system.
How to Use
1. Insert the probe connector directly into the probe socket on the
ultrasound system.
2. Turn the knob clockwise to lock the connector.
3. The excess cable can be hung on the hook on the ultrasound
system.
Thank you so much for your attention .If you're interested in Sonoscape L741 Ultrasound Linear Array Probe For SSI-8000,
SSI-6000, SSI-
5000, And S8 Series Ultrasound Systems ,feel free to contact us .Thank you .
