Urban Construction Stainless Steel Manual Globe Valve
Globe Valve Description
A globe valve is a valve that controls flow with a disk that moves
to open or close an exit. This disk is attached to a stem, which
you can move using a handle or lever.
Globe valves are handy for adjusting flow, managing pressure, and
controlling temperature in many situations. They are easier to use
and take care of compared to other valves and tend to leak less.
This makes them suitable for a wide range of uses.
THE MAIN TECHNICAL DATAS
| Suitable medium | Water, oil, steam |
| Working temperature | Less than 425 centigrade |
| Nominal pressure | PN16/25/40 |
MATERIALS OF PARTS
| Body | WCB |
| Bonnet | WCB |
| Gland | WCB |
| Seal | Stainless steel |
| Stem | Steel 45# |
Globe Valve Performance Parmeter
| NO | Project name | 150(Lb) | 300(Lb) | 600(Lb) | 900(Lb) | (1500Lb) | 2500(Lb) |
| 1 | PN(MPa) | 2.0 | 5.0 | 10.0 | 15.0 | 25.0 | 45.0 |
| 2 | Case Test preesure(Mpa) | 3.0 | 7.5 | 15.0 | 22.5 | 37.5 | 67.5 |
| 3 | High-pressure sealing Test pressure(Mpa) | 2.2 | 5.5 | 11.0 | 16.5 | 27.5 | 49.5 |
| 4 | Maximum teperature Working pressure(Mpa) | ≤2.0 | ≤5.2 | ≤10.4 | ≤15.6 | ≤25.8 | ≤45.8
|
Product Features
(1) The structure is simpler than that of the gate valve, and it is
easier to manufacture and maintain.
(2) The sealing surface is not easy to wear and scratch, and the
sealing performance is good. There is no relative sliding between
the valve disc and the sealing surface of the valve body during
opening and closing, so the wear and scratch are not serious, the
sealing performance is good, and the service life is long.
(3) When opening and closing, the valve stroke is small, so the
original valve height is smaller than that of the gate valve, but
the structural height is longer than that of the gate valve.
Who we are
SND has been producing and selling metal goods for about 20
years.By using manufacturing techniques including sand casting,
lost wax casting, lost foam casting, and precision machining, the
company has been supplying goods made of materials like cast iron,
steel, stainless steel, aluminum, etc. Additionally offered are
surface finishing and assembly services.
Our company has successfully created products in a variety of
industries, including automotive, rail transportation, agricultural
machinery, chemical, energy, electricity, water, air compressor,
and construction, thanks to our consistent efforts over the past
few years.
Our factories' ISO9001-accredited quality control systems guarantee
a consistent and dependable quality for each and every component.
Spectrometer, ultrasonic, magnetic, permeability, elongation,
tensile/yield strength, and other inspections are carried out as
part of routine production procedures.
