The TH230D30NZ-6 is a 6.9kW high-frequency switching rectifier module engineered for 220V/230V DC power systems. It accepts a wide
three-phase input of 323–456VAC and delivers a precisely regulated
output of 176–300VDC at 30A, making it ideal for substations, power
plants, and industrial control systems. Built on full-digital
control, it features RS-485 and CAN bus communication, N+1
hot-swappable redundancy, and peak efficiency ≥93%, ensuring stable
24/7 DC power with seamless integration into existing monitoring
networks.
Product Parameters
| Parameter | Specification |
|---|
| Model | TH230D30NZ-6 |
| Brand / Origin | TONHE / Hebei, China |
| Certification | CE |
| Input Voltage | Three-phase 380VAC (-15%~+20%), 323–456VAC |
| Input Frequency | 45–55 Hz |
| Output Voltage Range | 176–300VDC (nominal 220V/230V) |
| Rated Output Current | 30 A |
| Current Limit Setting Range | 3–33 A |
| Rated Output Power | ≈6.9 kW (at 230VDC) |
| Peak Efficiency | ≥93% |
| Power Factor | ≥0.98 (full load) |
| Harmonic Current | ≤8% (half load) / ≤5% (full load) |
| Voltage Regulation Accuracy | ≤±0.5% |
| Current Regulation Accuracy | ≤±1% |
| Output Ripple (peak-to-peak) | ≤0.5% |
| Current Sharing Imbalance | ≤±3% |
| Soft Start Time | 3–8 s |
| Communication Interface | RS-485 (Modbus) + CAN bus |
| Protection | OVP (HW+SW dual), short-circuit foldback auto-recovery, current
limit, over-temperature |
| Insulation Strength | 2100VAC / 1 min, earth leakage ≤10mA |
| Insulation Resistance | ≥10MΩ (1000V test) |
| Cooling Method | Forced fan cooling |
| Noise | ≤60 dB |
| Operating Temperature | -10°C ~ +40°C |
| Storage Temperature | -25°C ~ +60°C |
| Warranty | 12 months |
Product Advantages
- High power density – 220V high-voltage output with 30A current
capacity in a compact hot-swappable module.
- Clean power quality – Power factor ≥0.98, THD ≤5% at full load,
ripple ≤0.5%, protecting sensitive downstream loads.
- Precision full-digital control – Voltage accuracy ≤±0.5%, current
accuracy ≤±1% for stable float/boost charging.
- Dual communication – RS-485 and CAN bus support for flexible
integration into automated DC power management systems.
- Scalable & serviceable – N+1 hot-swap redundancy with full
"four-remote" monitoring (telemetry, telesignaling, telecontrol,
teleadjustment).
- Comprehensive protection – Dual HW/SW overvoltage, short-circuit
foldback with auto-recovery, current limiting and over-temperature
protection.
- Field-proven reliability – CE certified; TONHE has completed 290+
projects for 220kV–500kV substations with over 40% domestic market
share and 1 million modules produced annually.
FAQ
Q1: What input power supply does the TH230D30NZ-6 require?
It requires a three-phase 380VAC supply (operating range
323–456VAC, 45–55Hz). Single-phase input versions are not supported
by this model.
Q2: Can multiple modules run in parallel?
Yes. Modules can be paralleled with current sharing imbalance ≤±3%,
supporting N+1 or N+M redundant configurations for seamless
capacity expansion.
Q3: How does the module communicate with the monitoring system?
It supports both RS-485 (Modbus protocol) and CAN bus interfaces,
allowing easy integration with your existing DC screen monitoring
unit.
Q4: Is the module hot-swappable? What about maintenance?
Yes, it is fully hot-swappable. A faulty module can be replaced
online without powering down the system, and protection
(short-circuit auto-recovery, OVP, OTP) minimizes maintenance
downtime.
Q5: What certifications and after-sales support do you provide?
The module is CE certified. We provide a 12-month warranty,
factory-direct technical support, sample orders for testing, and
OEM/ODM customization on request.
