Electrical Test And Measurement Equipment Featuring Durable
Construction and Components to Ensure Long Term Operational
Stability
Product Introduction
- increase large current and low current two product.
- increase power (energy) display.
- current overrun and power transfinite adjustment process more
intuitive, more convenient operation.
- current and power of the upper limit and lower limit alarm function
can be set up respectively whether to enable.
- can adjust the transfinite alarm time.
Data display
In each area will show the instrument work normally, the
corresponding parameters, the parameters of display format as
described below:
A:Voltage
Instrument display the ac voltage value is valid values,range is
0－600V, display format is 0.0 V to 600.0 V
If A zone shows "OVER", said the voltage is greater than the actual
measuring range, shall be immediately disconnected or lower voltage
circuit, otherwise, stay for a long time, may damage the
instrument.
B:Current
Instrument display the ac current value is valid values,according
to the different type of products,display format is :
0.00－99.99mA RK9813N,the measured current under 100 ma
0.080－9.999A Current is less than 10 a
10.00－99.99A Current greater than or equal to 10 a
C:Power
Instrument display power for active power, when the power factor is
1, it is equal to the apparent power;When the power factor isnt 1,
active power is equal to the apparent power multiplied by the
absolute value of power factor.
