Rectilinear Vibrating Fluid Bed Drying Equipment 2.7M2

Customized Rectilinear Vibrating Chicken Essence Fluid Bed Drying Equipment

Material is fed into the dryer from feeding port, under the action of vibrating force, material moves forward with the fluidized
state continuously along the horizontal direction. Hot air passes through fluid bed from bottom to up and does heat exchange with damp material. After the powder is collected by cyclone separator, damp air is exhausted out. Dried product is discharged from discharging port.

Fluid Bed Dryer Working Principle

The material has been feed into the salt fluidized bed dryer / fluidized bed cooler, under the dual function of the vibration and air flow, the material move along the fluid bed as throwing forward continuously. Hot air upward through the fluid bed and wet materials from the heat after the exchange, after the cyclone dust emissions from dry materials from discharging from the discharging end.

Fluid Bed Dryer Features

1. The vibration is created by motor. It is stable in operation and convenient in maintenance, low noise and long life.
2. High heat efficiency, raw material is heated evenly and heat exchange is fully used and dry capacity is high. Compared with ordinary drier, the energy can be saved about 30%. The state of fluidization is uniform and no dead gaps or broken phenomenon so as to have dry, cool products.
3. It is good in regulation and wide in suitability. The thickness of raw material layer and movable speed inside the machine and the amplitude can be adjusted.
4. It is small for damaging the surface of raw material. The equipment can be used for drying raw materials that are easy broken. The drying effect can not be affected even if raw materials have irregular shape.
5. It is effective to prevent cross pollution between raw material and air because the equipment adapts fully closed structure. 6. 6. The environment of operation is clean.
7. You can string multi-set to raised capacity of raw materials, such as polyacrylamide.

Fluid Bed Dryer Charactaristics

♦Materials have been heated evenly, full exchanged the heat. It is a process of large intensity of drying.
♦ The vibration motor drive has been used, with the advantages of smooth operation, easy maintenance, low noise, long life
♦ It flows stability, with no dead angle and blown through phenomenon.
♦ It is adjustable, wide adaptation. The moving speed of the bed depth and the material in the dryer can achieve stepless adjustment by the changes of the amplitude.
♦ It makes small damage to the surface of the material, can be used for the drying of the fragile materials and will not affect the work results if the particles are irregular.
♦ It uses full closed structure; effectively prevent the cross-contamination of the materials and air, clean operation environment.
♦ Materials drying time is basic equality, residence time is short, bed depth is small, usually 2 ~ 5cm.

Fluid Bed Dryer Technical Parameters

Model	A	B	C	D	E	F	Weight(kg)
VFBD-3x0.3	3000	300	1350	900	430	1650	1250
VFBD-4.5x0.3	4500	300	1350	900	430	1650	1560
VFBD-4.5X0.45	4500	450	1550	950	430	1700	1670
VFBD-4.5X0.6	4500	600	1650	950	430	1700	1910
VFBD-6x0.45	6000	450	1650	950	430	1700	2100
VFBD-6x0.6	6000	600	1700	1000	500	1700	2410
VFBD-6x0.75	6000	750	1850	1000	600	1850	2340
VFBD-6x0.9	6000	900	2000	1000	600	1850	3160
VFBD-7.5x0.6	7500	600	1850	1000	600	1850	3200
VFBD-7.5x0.75	7500	750	2000	1000	600	1850	3600
VFBD-7.5x0.9	7500	900	2100	1000	600	1850	4140
VFBD-7.5x1.2	7500	1200	2500	1150	800	2050	5190
VFBD-7.5x1.5	7500	1500	2850	1570	800	2370	6426
VFBD-8x1.8	8000	1800	3250	1800	900	2700	8600

Model	Area of fluidized bed(M2)	Inlet air temperature(oC)	Outlet air temperature(oC)	Water evaporation(kg/h)	Vibration motor model	Vibration motor power
VFBD-3x0.3	0.9	70-140	40-70	20-35	YZS8-6	0.75x2
VFBD-4.5x0.3	1.35			35-50	YZS10-6	0.75x2
VFBD-4.5X0.45	2.025			50-70	YZS15-6	1.1x2
VFBD-4.5X0.6	2.7			70-90	YZS15-6	1.1x2
VFBD-6x0.45	2.7			80-100	YZS15-6	1.5x2
VFBD-6x0.6	3.6			100-130	YZS20-6	1.5x2
VFBD-6x0.75	4.5			120-170	YZS20-6	2.2x2
VFBD-6x0.9	5.4			140-170	YZS30-6	2.2x2
VFBD-7.5x0.6	4.5			130-150	YZS30-6	2.2x2
VFBD-7.5x0.75	5.625			150-180	YZS40-6	3.0x2
VFBD-7.5x0.9	6.75			160-210	YZS40-6	3.0x2
VFBD-7.5x1.2	9.0			200-280	YZS50-6	3.7x2
VFBD-7.5x1.5	11.25			230-330	YZS50-6	3.7x2
VFBD-8x1.8	14.4			290-420	YZS75-6	5.5x2

Fluid Bed Dryer Application

Vibrating fluid bed dryer is widely used in light industry, chemical industry, foodstuff, agricultural products, powder, granule,
and small block material in pharmaceutical industry. Material examples are as following: refined salt, aginomoto, citric acid,
oxalate, potassium permanganate, sesame, pentaerythritol, HPAM, feed, hypha protein, sodium sulfate, plastic archon, catalyst,
stripping and slicing potato, baking soda, detergent, quartz sand, soybean billet, ban pulp, metal powder, boric acid, sodium
borate, activated clay, compound fertilizer, etc.

Fluid Bed Dryer Flow

Fluid Bed Dryer Show

Contact Me

Jiangsu Guojin Drying Technology Co.,Ltd. specializes in the research and development and manufacture of drying, mixing, granulating, crushing, conveying, screening and other equipment. It has now become a large-scale enterprise in the drying equipment industry and a designated production enterprise of China Chemical Equipment Corporation. Especially, it has unique advantages in mesh belt type, hollow blade, disc type, rake type, fluidized bed, flash evaporation, airflow, spray, vacuum drying equipment, calcination, etc. Widely used in chemical, pharmaceutical, food, environmental protection, building materials, electronics, feed and other industries. Tens of thousands of users are spread all over the country and sold to more than then countries.

The company is located in Sanhekou Development Zone, Tianning District, Changzhou City, the birthplace of China's drying equipment industry. It is adjacent to Beijing-Shanghai Expressway, Shanghai-Nanjing Railway and Hengshan Crossing of Shanghai-Nanjing Expressway, 5km away from Shanghai in the east, Wuxi and Suzhou in the south, and the Yangtze River in the north.

The company has complete processing equipment. There are several sets of manufacturing equipment such as lifting, welding and cutting. It has excellent product development environment and production environment. The company has adopted advanced management methods and established a perfect quality assurance system.

Our company has established a set of perfect after-sales service system, which tracks and monitors all ex-factory products and the users are satisfied. "work with great care and keep improving" is the company's requirement for emplyees. Facing the increasingly standardized domestic and foreign markets, the company adheres to the corporate philosophy of "open competition, cooperative innovation, balance of interests and common development" and faces up to challenges with the belief of winning.