Slickline Wireline BO Type Selective Positioning Tool
BO type selective positioning tool Wireline Running Tool
I.Introduction:
The BO type selective positioning tool can open or close a desired
sliding side door by simply deploying the tool with the in the selective position, this will
allow for the shifting tool to pass through the shifting mechanism of any sleeves up hole, when the
desired sleeve is reached the shifting tool is manipulated to the non-selective position and the
sleeve can be shifted to either the opened or closed position depending on the type of sliding side
door.The BO Selective positioning Tool is designed to selectively shift
the inner sleeve of a sliding side door circulating device into the down position only
II.General Technical Parameters
| Size | Fishing neck | outer diameter | Connection |
| 1.5＂ | 1.187＂ | 1.49＂ | 15/16-10UN |
| 1.875＂ | 1.375＂ | 1.84＂ | 15/16-10UN |
| 2.313＂ | 1.75＂ | 2.34＂ | 15/16-10UN |
| 2.562＂ | 1.75＂ | 2.53＂ | 15/16-10UN |
| 2.75＂ | 2.313＂ | 2.72＂ | 1-1/16-10UN |
| 2.813＂ | 2.313＂ | 2.72＂ | 1-1/16-10UN |
| 3.313＂ | 2.313＂ | 3.25＂ | 1-1/16-10UN |
| 3.688＂ | 3.125＂ | 3.66＂ | 1-1/16-10UN |
| 3.813＂ | 3.125＂ | 3.75＂ | 1-1/16-10UN |
| 4.562＂ | 3.125＂ | 4.53＂ | 1-1/16-10UN |
III.Structural features and use:
BO type selection positioning tool consists of upper joint, spring,
key, spring sleeve, slip outer cylinder, mandrel, upper retaining
ring, lower retaining ring, main spring, positioning claw spring,
positioning claw and so on.
The upper part is structurally combined with the lower part of the
X-shaped lock cylinder by a B-type self-release positioning tool.
When putting in operation, the key will be automatically retracted
during the putting process, and the positioning claw is in the
spring sleeve of the lock cylinder.
IV, matters needing attention:
1. Before going down the well, check the size of the pop-up of the
key and positioning claw;
2. When not in use temporarily, apply grease to the connecting
thread and put it with a protective wire.
Welcome to contact us at any time.
◆About Baoji RuiXin Slickline Tools
Baoji Ruixin Energy Equipment Co., Ltd. was established in 2012. It
is an IS0: 9001-2015 and API Q1 system certified technology
research and development organization specializing in the design
and manufacture of steel wire, cable and coiled tubing tools. With
strong new product research and development capabilities, it has
obtained 12 national utility model patent certificates and 1
invention patent certificate. Undertook two prefecture-level and
provincial-level scientific research projects. Our products include
wireline wireline wellhead blowout prevention equipment, wireline
downhole tools and coiled tubing downhole tools. At present, we
have provided professional equipment and technical support to more
than 50 oilfield service companies in various regions at home and
abroad.
◆Strict quality control system
Steel wire working tools are certified by API, and all
manufacturing are strictly in accordance with API system, including
quality control management, environmental management and
occupational health and safety management. For each wire working
tool and each part, we have achieved traceability from raw
materials, production process to product shipment.
◆Hard work, after-sales service
On-site technical guidance exchanges with each other. Our sales and
technical personnel communicated well with front-line engineers and
technical experts on the job site, and solved technical problems
such as material selection, sealing structure optimization, and
accident handling in complex environments. And carried out many
technical exchanges and friendly cooperation. We have done a good
job of product after-sales service for customers, and we provide
customers with more satisfactory services. We would like to thank
more and more customers for their support and trust. In the future,
we will do better.
