Bailey IMMFP12 Controls ABB Multi-Function Processor ABB PLC Module
The IMMFP12 Multi-Function Processor Module is a powerful
stand-alone controller for use in complex control applications. It
has the processing speeds and storage capabilities necessary for
advanced control applications. The IMMFP12 module is a
user-configurable device that receives process input and output
through a variety of analog and digital I/O modules.
This instruction manual provides information about how the IMMFP12
module functions and how to install, configure, operate, and
troubleshoot the module.
The microprocessor, operating at 16 megahertz, enables module
operation and control. The operating system instructions and
function code library of the microprocessor reside in read-only
memory (ROM). Since the microprocessor is responsible for overall
module operation, it communicates with all the functional blocks.
The microprocessor also constantly triggers the machine fault timer
(MFT) circuit. If the microprocessor or module software fails and
the MFT circuit is not reset, the MFT circuit issues a board-wide
reset, and the status LED turns red. This condition is known as a
fatal error.
The MFP module goes into error mode whenever the built-in system
diagnostics detect a hardware or configuration error. If a hardware
error is detected, the module halts and displays the error code
using LEDs one through eight. If an NVRAM memory error is detected,
the status LED flashes, but the module continues to operate. This
is possible because a copy of the valid configuration is loaded
into RAM memory and is executed from there. The next time the
module is reset it will not start up but will fail with an NVRAM
memory error.
Contact For More 
| Manager | Unik You |
| Mail | unik@cambia.cn |
| Tel | 86 18030205725 |
| Service | 24 hours online for worldwide |
Other Hot-selling of ABB Bailey
IMAMI01 Auto Manual Interface Module
IMAMM03 Analog Master Module
IMAOM01 Analog Output Module
IMASI02 Analog Input Module
IMASI02S Analog Input Module
IMASI03 Analog Input Slave Module
IMASI13 Analog Input Module
IMASI23 Analog Input Module
IMASM01 Analog Input Slave Module
IMASM02 Analog Input Slave Module
IMASM02S Isolated Analog Input Module
IMASM03 Analog Slave Module
IMASM04 Analog Input Module
IMASO01 Analog Output Slave Module
IMASO11 Analog Output Slave Module
IMBLK01 Blank Module Assembly
IMCIS02 Control I/O Slave Module
IMCIS12 Control I/O Slave Module
IMCIS22 Control I/O Slave Module
IMCKN01 Clock Network Module
IMCKN02 Clock Network Module
IMCOM03 Enhanced Controller Module
IMCOM04 Advanced Controller Module
IMCPM01 Configuration Port Module
IMCPM02 Communication Port Module
IMCPM03 Communication Port Module
| SPDSI13 | IIMCP02 | NTD101 | NTDI01 |
| SPNIS21 | IMDSO14 | SPDS014 | NTR002-A |
| SPNPM22 | NTCL01 | SPAS011 | IMFEC12 |
| SPASI23 | INNPM22 | SPNIS21 | IMDSI14 |
| SPDSO14 | GPU200R | SPNPM22 | NTMP01 |
| SPFEC12 | TPS02 | IMASO11 | IMDSM04 |
| SPDSI14 | IEPAS02 | SPBRC300 | NTAI06 |
| SPASO11 | IMHSS03 | INNPM12 | BRC300 |
| IMSET01 | INIIT03 | NTAI05 | SCAAE35510 |
| IMSED01 | IMFCS01 | NTDI21-A | IMASI23 |
| INNPM12 | INICT03A | NTHS03 | IMMFP12 |
| INNIS01 | IMMPI01 | NTRO12-A | SPFEC12 |
| SPDSI14 | INNIS21 | NTCL01-A | SPASO11 |
