ITEM NO |
WXMB073
|
| Car Make |
For Benz C/E/GLC W213/X253/W205
|
| Compressor Model |
6SAS14C
|
| Grooves |
6PK
|
| Voltage |
12V
|
| Refrigerant |
R134a
|
| OE NO |
A0008308301/A0008303002/A0008303902/A0008304002/A0032306911
|
If your car air conditioning compressor is faulty and needs repair,
you can consider the following steps:
1. Diagnosis: Firstly, get a professional diagnosis to confirm that
the compressor is indeed the problem. This may involve testing the
system, checking for leaks, and inspecting the compressor for any
signs of damage.
2. Repair vs Replacement: Depending on the extent of the damage and
the cost of repairs, you may need to decide whether to repair or
replace the compressor. In some cases, it may be more
cost-effective to replace the entire compressor unit.
3. Professional Assistance: Unless you have experience and
knowledge in automotive air conditioning systems, it is advisable
to seek professional assistance for the repair. An experienced
technician will have the necessary tools and expertise to safely
repair the compressor.
4. Compressor Repair: If the decision is to repair the compressor,
the specific steps will depend on the nature of the damage. It may
involve fixing leaks, replacing faulty components, or repairing
internal mechanical issues.
5. Compressor Replacement: If the decision is to replace the
compressor, the faulty one will need to be removed first. This
involves evacuating the refrigerant, disconnecting electrical and
mounting connections, and removing the compressor from the system.
The new compressor can then be installed following the
manufacturer's instructions.
6. Recharge the System: After repair or replacement, the air
conditioning system will need to be recharged with the appropriate
amount of refrigerant following the manufacturer's guidelines.
7. System Test: Once the repair or replacement is complete, it is
important to thoroughly test the system to ensure the compressor is
functioning properly and there are no leaks.
Again, it is recommended to consult the vehicle's service manual or
seek professional assistance for specific instructions on repairing
or replacing a car air conditioning compressor.
Test car air conditioning compressor
1. Start by visually inspecting the compressor for any signs of
damage or leakage.
2. Measure the voltage at the compressor's electrical connector
using a multimeter to ensure it is receiving power.
3. Check the clutch engagement by turning on the air conditioning
and observing if the compressor clutch engages and spins freely.
4. Use a manifold gauge set to check the high and low side
pressures. Compare the readings to the manufacturer's
specifications to determine if the compressor is functioning
properly.
5. If all other tests indicate a fault with the compressor, it may
need to be removed and taken to a qualified professional for
further testing and repair.
