Semi-Automatic Screen Printing Machine For Round Surface Of Glass
Cosmetic Bottle
The barrel screen printing machine is suitable for printing large
water barrels, mineral water barrels, chemical barrels, paint
barrels, oil barrels and other barrel-shaped trademarks. The
machine uses a frequency conversion motor and guide rail sliding
printing control, the machine is more stable, higher precision, and
lower noise.
1. The microcomputer controls the action of each function, with a
high degree of automation and simple and convenient operation
2. Built-in four-digit automatic counter
3. It has printing functions such as round and tapered surfaces,
4. Printing stroke and speed are adjustable to meet different
printing requirements
5. The worktable can be fine-tuned up and down, left and right, and
plane swing angle, with high printing accuracy, convenient and fast
adjustment
6. Pneumatic printing control and pressure adjustment system
7. Microcomputer system controller with stable and reliable
performance
8. Clear liquid crystal display, showing the working status of the
machine at any time
9. High-quality Korean sensors and perfect fault alarm system
10. Convenient foot switch, simple operation and convenient
maintenance
11. High-quality alloy die-casting parts and wear-resistant
imported bearing sleeves
12. Frequency conversion motor control can make the stop position
more accurate
13. Independent printing and ink return speed control
14. Blow function of printing seat, can print softer products
15. The round and flat products have separate special fixtures
16. Guide rail type left and right sliding printing structure,
printing is smoother and higher precision
17. Action mode selection: automatic|semi-automatic|manual
Machine parameters
Start mode: panel|foot switch
Up and down drive mode: pneumatic
Left and right drive mode: electric
Workpiece up and down stroke: 100MM
Left and right stroke: 1350mm
Maximum printing area: 1350mm (the length of the circumference or
arc) * 400mm (width)
Printable diameter range: ￠20-￠410MM
Maximum printing length: 1350MM
Printing speed: 800-1000PCS/H
Power requirements: 220V 50/60HZ 500W
Air pressure requirement: 5-7BAR
Body size: 1850x1500x1450mm
Weight: 220KG
