Automatic resistance inspection machine for Busway Insulation
Testing
Equipment data on automatic busbar inspection line
| No. | Parameters |
| Model | KD-JCX/NC-E/H-6 |
| Busbar Height | 100mm~650mm |
| Busbar Length | 1200mm~6000mm |
| Busbar Type | Straight length type |
| Position Type | Unilateral / Middle |
Working Efficiency | 2 min/piece(testing time is adjustable.) |
| Servo Nos | 2 axis( Z axis/X axis) |
Vision System | Phase error judgment( optional) |
Printing System | Bar code printing/ Report printing( optional) |
High Voltage Withstanding Test | 0~5000V |
| Insulation Test | 1~1000V |
| Grounding Test | 0~25A |
Power | 380~415VAC 50~60Hz 5kW |
| Equipment Dimension | L12000mm*W1200mm*H1900mm |
Function introduction
Busbar Automatic Production Line is composed of three parts,
feeding positioning station, inspection station and discharge
station. When the busbar enters the feeding position, the control
system will select the right testing fixture to start testing from
the information identified by bar code or previous assembly line.
Three tests will be performed including HV withstanding test,
insulation resistance test and grounding test. After test is
finished, testing report will be generated.
Automatic inspection machine is mainly used for batch inspecting on
the straight busbar. Elbow busbar type shall be tested on manual
inspection machine.
This report can be saved, printed on site and recorded remotely.
Its format can be set according to customer’s requirements.
Busbar Trunking System is the is a system of distributing electric
power using copper or aluminium busbar with suitable enclosures and
good amount of protection to prevent the cables from getting
damaged due to foreign bodies.
Busbars are now becoming irreplaceable simply because of the
convenience and safety factor. While using traditional cables, the
cost of cabling and trunking and the time taken for installation is
much higher than busbars as well.
Installing busbars over conventional cabling has a range of
advantages some of which are mentioned below:
Design: Busbars have a compact design through which compressed flat
conductors can pass through the enclosure. Due to the compact
designs, busbars require lesser space than traditional cabling
systems and this is a major advantage when thousands of amperes of
electricity need to be transmitted.
Heat Absorption: Since the design is compact and has a metal casing
with well-defined surface, busbars can absorb heat generated while
transmissions and distribution of electricity in the walls of the
enclosure. The system of cooling is much better than traditional
cabling system.
Flexibility: Busbars are more flexible in nature compared to cables
in the sense that it can be used in any kind of structure with any
configuration. They are easily modifiable and hence the addition of
an extra room or building can be easily done. Busbars can also be
relocated without much of a capital expenditure.
Cost Savings: Busbars can be mounted easily than a cable and incurs
a lesser cost of installation than traditional cables. They can
also be mounted at a lesser time than traditional cables.
Better Resistance: Busbars have rigid design elements and hence has
better resistance than cables, especially in case of short
circuits. Busbars have a minimum distance between the conductors
which in turn reduces the induction of resistance. Busbars also
have a thin and flat tire which helps in optimal distribution of
density of current and in turn reduces resistance. Due to lower
levels of density, voltage loss is much lower than cables for the
same length.
Reduced Loss of Energy: Busbars have lower resistance than cables.
Hence the loss of energy due to transmission and distribution is
lower in Busbars. Busbars also have a limited growth of reactive
power to operate compared to cable systems.
