Biohorizons® Titanium Temporary Abutment Compatible
3.0mm/ NP 3.5mm/ RP 4.5mm/ WP 5.7mm (Engaging & Non-Engaging)
Material:
Ti 6AI-4V ELI (Supply from Germany)
Feature:
* Titanium interface abutment
* 1pc Screw Included
* Precision machined up to ± 5µm
* Combination of high fatigue strength
* Superior level of biocompatibility
* Exterior retentions for more cementation bonding
Specific design ensures a stable union, reinforcing the structure
of zirconium in the areas of greatest stress, softening edges and
ensuring the service life of the prosthesis.
Furthermore, the saving is also shown in the less time needed when
working on the most sensitive part of the prosthesis, the
adjustment with the implant.
Approved by CE, ISO 9001, ISO 13485
Fig. 7
Points of Biohorizons Internal:
Abutment for Screw abutments serve as intermediary abutments for splinted, screw
retained restorations and substructures. Theses abutments may be
utilized in situations with excessive tissue height (≥2mm) above
implants or to correct a unfavorable final screw access path. The
abutments are color coded for platform diameter identification
yellow (3.5mm) green (4.5mm) and blue (5.7mm). Special UCLA
abutments (discussed below) or CAD CAM substructures are required
for Abutment for Screw abutments. Impression copings for already
installed Abutment for Screw abutments are also Abutment for Screw
specific.
Straight Abutment for Screw abutments (Fig.7) are non indexed and machined
as a mono block, integrating the screw and abutment in to a single
entity. 3.5 and 4.5mm platform abutments are offered in three
collar heights of 1, 3 and 5mm while 5.7mm platform abutments are
available in two collar heights of 1 and 3mm.
Fig. 8
Angled Abutment for Screw abutments (Fig.8) are machined with a
implant/abutment indexing feature (hexagon) and the angle of
correction is away from one of the flat sides of the indexing
hexagon. The abutments are of considerable height (5mm). This
should be taken in to account during the treatment planning and
restorative phase. 3.5mm platform angled Abutment for Screw
abutments are available with a 17 degree angle of correction while
4.5mm platform abutments are offered in two angulations of 15 and
25 degrees. 5.7mm platform abutments are machined with a correction
of 15 degrees only.
