Cold Rolled Steel Plate Electric Power Building Rack And Pinion
Elevator
Rack And Pinion Elevator Application
We are special supplier of building hoist in China, our building
hoist have been Widely exported to all over the world and won good
reputation, whose payload capacity is as much as 3200kg, lifting
speed can reach up to 96m/min, and the erection height reaches up
to 450m., our products have been widely used for transportation for
both men and cargo in field of general buildings, but also
industry, electric power, mining well, oil, chemical industry etc.
Rack And Pinion Elevator Standard Configuration
There is a small crane for conenient assembly of the construction
lift.
Available in single or twin hoist cage configuration.
Manual or Automatic Controls of the hoist is optional.
Lighting inside construction elevator car is LED ceiling lamp
The construction material hoist cage roof doors are equipped with
Interlock.
Equipped with hoist drop test facility with remote control.
A frequency control unit (FC), with closed-loop, be equipped.
Rack And Pinion Elevator Optional equipment
An intelligent elevator control system, Multi-function Control
System, with functions of fault detect, display and alarm, and
automatic cage landing/stop and floor selector, is available.
Automatic greasing machine for rack and pinion elevator is
availble.
Multi-function Control System of fault detect, display and alarm,
and automatic cage landing/stop and floor selection is available.
Rack And Pinion Elevator Technical Data
| Item & Article No. | SC320(BZ) KP-B17, SC320/320(BZ) KP-B18 Rack And Pinion Elevator |
| Payload capacity | 3,200 kg per cage |
| Lifting speed | 0–46 m/min. |
| Max. lifting height | 450 m |
| Cage width (internal) | 1.5 m |
| Cage length (internal) | 3.2 m |
| Cage height (internal) | 2.35 m |
| Motor control | FC control |
| Engine power | 3x15 kw per cage |
| Gearbox | Helical reducer |
| Safety device type | centrifugal brake |
| Power supply range | 380–500 V, 50 or 60 Hz, 3 phase |
| Mast section | square column 650*650*1508 mm with bolted rack |
| Rack module | 8 |
