Baby Adult Digital Forehead Thermometer , IR Temperature Gun
Professional
Product Description
- Short press Detect button, starting up and display"8888", press
it again to measure the temperature.
- Short press the SET button to change the measuring target between
the body and the surface of the object.
- Short press"+"button to enter the memory mode, press it again to
read the next record.
- Short press"-"button to enter the memory mode,press it again to
read the previous record.
- Holding the SET button more than 5 seconds to switch between ℃
and ℉
- Holding the SET button and pressing the DETECT button more than 2
seconds, it enter the manual adjusting mode. The screen displays
"F2", use"+" or "–"button to adjust the compensating value.press
the DETECT button save & exit.
Specification
| DC 3V, AAA battery*2 (1.5V*2) |
|
|---|
| Measuring range | 32.0℃-42.9℃ (89.6℉-109.2℉)in body temperature mode |
|---|
| Measurement accuracy | 35.0℃-42.0℃:±0.2℃ |
|---|
| Tri-color backlight | 32.0℃~37.4℃:Green 37.5℃~38.4℃:Yellow 38.5℃~42.9℃:Red |
|---|
Specification
| Measurement Method | Infrared |
| Measuring range | Body temperature(32℃-43℃) |
| Object temperature (20℃-100℃) |
| Measurment Accuracy | ±0.3℃ |
| Backlight Reminder | 32.0-37.5℃/Green, 37.6 above/red |
| Measuring Distance | 2 - 5cm |
| Battery | 2* NO.5 batteries |
| Measurement Time | About 1 second |
| Low Power | 15s |
| shut down | automatic shut down consumption without operation |
| Produce Size | 158*94*41.5mm |
Advice before use
Infrared forehead thermometers have high requirements on the
surrounding environment. The correct method of use is the key to
accurate testing.
(1)This product is an infrared forehead thermometer that
professionally measures the temperature of the human body.
According to the difffference of human skin, the measured
temperature will be difffferent.
(2) When the room temperature changes greatly, the infrared frontal
thermometer should be placed in the room for 20 minutes before use.
(3) When the person to be measured comes from a place with a large
difffference in temperature from the measurement environment, they
should stay in the test environment for at least 5 minutes, and
wait until
the temperature is consistent with the environment before
measuring.
(4) The environment around the person to be tested must be stable.
Do not test in places with large air flflow such asfans and air
outlets of air conditioners.
Precautions
(1) Please do not use in the environment that does not meet the
requirements.
(2) Please do not stay near the electromagnetic range (such as
radio, mobile phone, etc.), otherwise it will affect product
performance.
(3) Please do not bump or drop this product, if it is damaged, stop
using it.
(4) Please wipe the surface of the product with alcohol gentaly
when it needs clean.
(5) If there is a problem with the product, do not attempt to
repair it yourself, please contact your dealer,
(6) In view of the many factors that affect the accuracy of the
measurement, this product is not a substitute for a doctor's
diagnosis. It is only used for screening. If an abnormality occurs,
please seek medical treatment in time.
