CZ Purlin Roll Forming Machine
Brief Introduction
1. For steel construction projects, C and Z steel purlins
(different web sizes and flange sizes) are commonly used.
Production characteristics and application of czu purlin roll
bending machine
2. One machine can produce different C / Z purlins through
automatic stepless adjustment. When producing different profiles,
there is no need to change the forming roll. The machine adopts the
automatic control mode, which can automatically pump, cut and shape
the purlin according to the input length, hole distance, quantity
and other parameters.
3. One side fixed, the other side adjustable
4. Designed for efficient production of various panel widths
5. The machine is easy to operate, high efficiency, forming speed
up to 20 m / min.
6. This machine can produce C, Z, u three kinds of profiles. It can
realize the conversion of C, Z, u purlins by changing the up and
down position of the roller side, which can be realized in less
than one minute.
Main Device Technical Parameters
| 5T manual decoiler |
| Steel coil width | from 200 mm to 600 mm |
| Internal diameter of coil | variable, from 470 mm to 510 mm |
| Maximal out diameter | 1600mm |
| Maximum coil weight | 5000 Kg |
| Working speed | 0-15m/min adjustable |
| Main motor power | 5.5KW AC motor |
| Hydraulic power | 3kw |
| Material of the profile | teel sheets for cold bending according to EN 10346 or equivalent
requirements |
| Thickness range | 1.5-3.0mm |
| Main motor power | 15kw, AC motor, motor inside of main machine(according the final
design) |
| Roll station | 18 station |
| Shaft diameter | ￠80mm |
| Machine roll forming speed | not less than 10 meters per minute |
| Transmission | by gear box for each station |
| Correction adjust system |
| Function | make the end product in straight, left and right, up and down |
| Adjust by hand wheel, manual |
| Roller material:ASTM52100 chrome plated surface with hardness 58-62
degree ,CNC, |
| Color | blue or base on customer request |
| Quantity | 1 set |
| Output table |
| Frame | welding by tube |
| Size | about 2.0m long*0.6mwide*0.9mhigh |
| One out table with two support roller |
| Supporter roller | ASTM 1045 with chrome |
| Diameter of rollers | 55mm |
| Quantity | 5units |
| Hydraulic station |
| Hydraulic power | 5.5kw |
| Working pressure | 12-16Mpa adjustable |
| Solenoid valve | 3 groups |
| Hydraulic oil | 46# hydraulic oil |
| Color | Blue (or base on customer request) |
| Quantity | 1 |
| Control desk |
| Programmable setting of profile length and quantity |
| Automatic stopping of the equipment after completion of the cutting
programme will be provided. |
| language | English and Chinese |
| Voltage, Frequency, Phase | 380 V, 50 Hz, 3Phase |
| Control panel | Button-type switch and touch screen |
| Unit of length | millimeter |
| PLC brand | Panasonic/ Mitsubishi |
Detailed Photo of Purlin Roll Forming Machine
