LIYI 3 Phase 380V 50HZ Hot Air Cycling Drying Chamber Digital
Temperature Display
Product description:
Digital Temperature Display High Temperature Economical Hot Air
Cycling Drying Chamber can provide a stable testing space for
pre-heating, drying, changes about physics and chemistry testing.
It adopts precision temperature controllter with high stability of
platinum resistance to temperature that makes temperature
well-distribution. It is applicable to a variety of products,
materials, electric, instruments, meters, components, electronics,
electricians and automobiles, aviations, plastics, machinery,
chemicals, foods, chemicals, hardware tools for doing drying test
and various constant adaptive tests at an constant temperature
condition.
Characteristics:
1. Automatic temperature control with digital thermal-sensor
2. Excellent thermal insulation property of ovens wall, lower
energy consumption,
3. Be able to pre-set temperature, digital temperature display with
LED panel.
4. Temperature value flashes on indicator when reach preset value.
5. Circulation fan facility to keep even temperature and uniform
heating
High temperature control accuracy:
Using SUS304 stainless steel heater as the heating element, the
intelligent temperature controller collects the temperature value
in the test chamber in real time, compares it with the temperature
setting value on the controller, and controls the on-off time of
the SSR through PID calculation.
In this way, the output heat of the heater is controlled. At the
same time, the forced hot air circulation mode is adopted to
achieve the purpose of operating the temperature inside the box
according to the setting program.
Operating mode:Fixed value operation
Safety device:
Leakage protection switch: The circuit breaker with leakage, short
circuit and overcurrent protection is activated to effectively
protect all electrical components;
Over-temperature protector: independent over-temperature protector,
when the temperature is abnormally too high, the heater power
supply is disconnected;
Safety device: grounding protection, heater short circuit
protection, motor overload protection;
Specifications:
| Model | Inner Size W*H*D(cm) |
External Size W*H*D(cm)
| Temperature Range(°C) | Heating up Time | Accuracy (°C) | Uniformity (°C) | Power | Rate of work (kw) |
| LY-645 | 45×40×40 | 66×92×55 |
(A-D) A:200°C B:300°C C:400°C D:500°C
|
RT~100°C About 10min | ±0.3 | ±1% | 220V Or 380V | 3.5 |
| LY-660 | 50×60×50 | 70×125×65 | ±0.3 | ±1% | 4.5 |
| LY-690 | 60×90×50 | 80×156×65 | ±0.3 | ±1% | 5.5 |
| LY-6100 | 80×100×60 | 100×166×75 | ±0.3 | ±1% | 8 |
| LY-6120 | 90×120×60 | 110×186×75 | ±0.3 | ±1% | 10 |
| LY-6140 | 140×120×60 | 160×186×75 | ±0.3 | ±1% | 12 |
| LY-6160 | 160×140×80 | 180×206×97 | ±0.3 | ±1% | 14 |
| LY-6180 | 180×140×100 | 200×200×118 | ±0.3 | ±1% | 16 |
Air supply system:
1. Forced convection level supply air circulation, the motor runs
circulatorilily to drive wind wheel to electric heaters rotor,send
the hot wind into the oven and then inhalt it to air passage after
using to be air source again, thus reduce heat cycle energy loss
and ensure the uniform temperature.When opening or closing the door
may cause disturbance action this system can be used to recover
temperature operation conditions quickly.
2. The motor is imported from Taiwan witch have long axis and can
endure high temperature.
3. The fan is a multipage turbine in high strength, equipped with
adjustable diversion within the boards witch can make the wind road
runs smoothly.
Material of Construction:
(1) Interior material is SUS#304 stainless steel
(2) Exterior material is paint coated steel plate
(3) Insulation Material of imported fire-proof rock wool
(4) Heating Medium: electric heating tube
Our service:
If you face any problems in future during testing process we
promise we will give you a reply within 48 hours and solution
provide within 3 working days. We can offer operation video and
English operation manual. We can provide video-con.
1. Considerate Service Different countries plugs, manually change
the-voltage from 110V to 220V, insurance indicator.
2.Excellent After sale Service: 12 months warranty. Besides, we can
help you to repair your problem controller freely, even it's not
from our factory. What you need to do is to send us the controller.
3.Commitment:We will sign a letter of commitment while we sign the
contract, which will improve your confidence to us.
4.Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air
bubble film before put them into the wooden case, which not only
has good shock absorption, impact resistance, heat sealing and also
has the advantages of nontoxic, odorless, moisture corrosion, good
transparency etc.
