SM 165 Engineering Educational Equipment Fluids Engineering
Experiment Equipment Studies In Hydrology
1. Description
In civil engineering, studies in hydrology are conducted in
connection with the design, construction and operation of hydraulic
engineering systems and water management functions. The studies
focus on topics such as seepage and flow of water in the soil and
the use of groundwater resources.
It can be used to study seepage and groundwater flows after
precipitation. Variable precipitation density and areas and
different groundwater supply and drain possibilities allow a wide
variety of experiments.
The precipitation element consists of two groups of three nozzles.
The core element is a sand-filled, stainless steel experiment tank
with inclination adjustment. Water can flow in (groundwater) or out
(drainage) via two chambers on the side. The experiment tank is
separated from the chambers by fine mesh screens. To study the
lowering of groundwater, two wells with open seam tubes are
available. Supply and water drain can be opened and closed, thus
allowing a wide variety of experimental conditions.
At the bottom of the experiment tank there are measured connections
to detect groundwater levels, which are displayed on 19 tube
manometers. The water supply is controlled by a valve and read on a
flow meter. The water drain is determined by a measuring weir.
2. Technical details
Specification
Investigation of precipitation-discharge relationships, storage
capacity of soils, seepage flows and groundwater flows
Closed water circuit
Inclinable stainless steel experiment tank contains 19 measuring
connections to detect groundwater levels, transparent splash guard
and screens for separating the chambers
2 wells with open seam tubes in the experiment tank
Precipitation device with 8 nozzles, adjustable
Water supplies and drains can be selected individually
Transparent measuring tank (flow)
Instruments: tube manometers (groundwater), flow meter (supply) and
measuring weir in the measuring tank (drain)
Technical data
Experiment tank
Area: 2x 1m2, depth: 0,2m
Max. sand filling: 0,3m3
Inclination adjustment: -2,5...5%
Precipitation device
8 nozzles, switchable in 2 groups of 4 nozzles
Flow rate per nozzle: 1...4,7L/min, square spray pattern
Pump
Power consumption: 0,55kW
Max. flow rate: 2000L/h
Storage tank, stainless steel: content 180L
Measuring ranges
Pressure: 19x 0...300mmWC
Flow rate:
1x 150...1700L/h (water supply)
1x 0...1700L/h (water drain)
230V, 50Hz, 1 phase
230V, 60Hz, 1 phase; 120V, 60Hz, 1 phase
UL/CSA optional
Required for operation
Sand (1...2mm grain size)
Product Details and Warranty
We supply suitable spare pats according to experiment requirement,
our products take aluminum structure, A4 paper dimension aluminum
and plastic hanging box structure.
We supply 3 years warranty time.
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with
pallet, and for equipment dimension less than 1CBM, we supply
plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Training Room Photo
Company Information
We supply professional educational training equipment and technical
teaching equipment, which has been widely applied in Engineering
Universities, Polytechnics, Technical Institute, Vocational Schools
as well as Industry workforce Development Programs and Training
Center. Our products allow students to learn and experiment through
valuable hands-on experience, and the technology covered by our
training equipment provides knowledge, experiments and didactic
skills development that are of critical importance to today´s and
tomorrow´s careers.
Photo for Clients Visiting Factory
Service
We supply supply7*24 hours service, customer design service, OEM
service, buyer label service. With professional engineers team and
sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
| No. | Feature Name | Details |
| 1 | Customer design | Yes |
| 2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client
requirements |
| 3 | Package | Plastic film+ carton+ Fine plywood |
| 4 | Products standard | International didactic equipment standard |
| 5 | Application range | Educational equipment for university, college, vocational training
centers |
| 6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
| 7 | Self owned brand | Shouldshine, SSEDU, JSS. |
| 8 | Production time | From 10 days to 60 days according to different items |
