New Pro-face GP2000 Series GP2400-TC41-24V TOUCH SCREEN GRAPHIC
PANEL
Product Description
XYCOM
PROFACE
GP2600-TC41-24V-W30
GP2600TC4124VW30
DISCONTINUED BY MANUFACTURER
OPERATOR INTERFACE
QUICKPANEL
12.1 INCHES
TFT COLOR LCD
24 VDC
ETHERNET
CF CARD
System Design
• Do not create GP touch panel switches that could possibly
endanger the safety of equipmentand personnel. Damage to the GP,
its I/O unit(s), cable(s), and other related equipment cancause an
output signal to remain continuously ON or OFF and possibly cause a
major acci-dent. Therefore, design all monitoring circuits using
limit switches, etc. to detect incorrectdevice movement. To prevent
accidents related to incorrect signal output or operation, de-sign
all switches used to control vital machine operations so they are
operated via a separatecontrol system.
• Do not create switches used to control machine safety operations,
such as an emergency stopswitch, as a GP touch screen icon. Be sure
to install these switches as separate hardwareswitches, otherwise
severe bodily injury or equipment damage can occur.
• Please design your system so that equipment will not malfunction
due to a communicationfault between the GP and its host controller.
This is to prevent any possibility of bodily injuryor material
damage
.• The GP is not appropriate for use with aircraft control devices,
aerospace equipment, centraltrunk data transmission (communication)
devices, nuclear power control devices, or medicallife support
equipment, due to these devices' inherent requirements of extremely
high levelsof safety and reliability.
• When using the GP with transportation vehicles (trains, cars and
ships), disaster and crimeprevention devices, various types of
safety equipment, non-life support related medicaldevices, etc.
redundant and/or failsafe system designs should be used to ensure
the properdegree of reliability and safety.
• Do not use the GP unit as a warning device for critical alarms
that can cause serious operatorinjury, machine damage or production
stoppage. Critical alarm indicators and their control/activator
units must be designed using stand-alone hardware and/or mechanical
interlocks.
• After the GP's backlight burns out, unlike the GP's "Standby
Mode", the touch panel is stillactive. If the operator fails to
notice that the backlight is burned out and touches the panel,
apotentially dangerous machine miss-operation can occur. Therefore,
do not use GP touchswitches for the control of any equipment safety
mechanisms, such as Emergency Stopswitches, etc. that protect
humans and equipment from injury and damage. If your GP'sbacklight
suddenly turns OFF, use the following steps to determine if the
backlight is actu-ally burned out.1) If your GP is not set to
"Standby Mode" and the screen has gone blank, your backlight
isburned out.2) Or, if your GP is set to Standby Mode, but touching
the screen does not cause the displayto reappear, your backlight is
burned out.Also, to prevent accidental machine miss-operation,
Digital suggests you use the GP's built-in "USE TOUCH PANEL AFTER
BACKLIGHT BURNOUT" feature, that will automati-cally detect a
burnout and disable the touch screen.Installation
• High voltage runs through the GP. Except for replacing the
backlight, never disassemble theGP, otherwise an electric shock can
occur.
• Do not modify the GP unit. Doing so may cause a fire or an
electric shock.
• Do not use the GP in an environment where flammable gasses are
present, since operatingthe GP may cause an explosion.
Wiring
• To prevent an electric shock, be sure to confirm that the GP's
power cord is not connected tothe main power when connecting any
cords, cables or lines to the GP.
• Be sure to replace the GP's plastic terminal block cover after
wiring is completed, sinceoperating the GP without the cover may
lead to an electric shock
• Do not use power beyond the GP's specified voltage range. Doing
so may cause a fire or anelectric shock.Maintenance
• The GP uses a lithium battery for backing up its internal clock
data. If the battery is incor-rectly replaced, the battery may
explode. To prevent this, please do not replace the
batteryyourself. When the battery needs to be replaced, please
contact your local GP distributor
SIMILAR PRODUCTS
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| Fanuc motor A0- | Yokogawa transmitter EJA- |
