Low Noise And Vibration Small Ps-130 Automatic Electric Pumps
0.25HP/0.18KW
Self Priming Pump APPLICATIONS:
The automatic booster system consists of a water
pump, an airtight pressure tank, and a pressure switch. The specially
designed structure makes it a better appearance and performance.
The pressure tank with a non-toxic rubber membrane, a pressure
vessel, has been pre-filled with an air pressure of about 0.12 Mpa
before leaving the factory. These systems give suitable mains water
pressure as required by modern domestic appliances and industrial
applications and ensure enough water to supply all user outlets.
STRUCTURAL CHARACTERISTICS:
| Main Specification | Standard | Optional |
| Transmission medium | Clean Water | |
| Pump body | Cast Iron | |
| Impeller | Brass | |
| Motor housing | Aluminum | |
| Stator&Rotor | 1. Cold-rolled silicon steel sheet by a high-speed punching
machine. 2. 100% high-quality copper wire |
| Front cover | Cast Iron | A Brass plate embedded to avoid impeller jam |
| Bearing | Chinese Best Quality Bearing | NSK, SKF, or on request |
| Mechanical seal | Graphene/Ceramic | Silicon Carbon |
| Shaft | Carbon Steel | Stainless Steel |
| Insulation | Class B | Class F |
| Protection | IP44 | IP54 |
| Voltage | 220-240V Single Phase | On Request |
| Frequency | 50HZ | 60HZ |
| Thermal protection | No | Yes |
| Automatic Pressure Control System | No | Yes |
| Cooling Type | External Ventilation | |
| Max. Suction Lift | 9M | |
| Max. Fluid Temperature | +60℃ | |
| Max. Environment Temperature | +40℃ | |
| Installation | Horizontal | |
| Connect Type | Thread | |
| CONSTRUCTION AND SAFETY STANDARDS in compliance with IEC |
Self Priming Pump TECHNICAL DATA:
| Model | Output | A | R.P.M. | Q.Max | H.Max | S.Head | Pipe Dia | LxWxH | N.W. |
| HP / KW | 1~220V | (l/min) | (m) | (M) | (mm) | (Kg) |
| PS-126 | 0.25 / 0.18 | 1.48 | 2850 | 36 | 33 | 9 | 1"x1" | 310x230x290 | 9 |
| AUTOPS-130 | 0.25 / 0.18 | 1.48 | 2850 | 36 | 33 | 9 | 1"x1" | 310x230x290 | 9 |
Other voltages and frequencies available on request
Self Priming Pump ADVANTAGE:
100% a high-quality copper,100% output
Cold-rolled silicon steel sheet by a high-speed punching machine
Good quality bearing, the surface more smooth, the dimension more
precise
Thermal protector
One year warranty
GUARANTEE:
Guarantee for one year from shipped on board date. During the
guarantee period, our company will provide free easy-damaged spare
parts for problems caused by our quality of production or raw
material, except the damageable spare parts caused by customer's
incorrect artificial operation. In addition, after expiration, our
company provides cost spare parts for maintenance.
