High Speed Electric Rotary Actuators With 50mm, 200N load, compact
size, full load speed 20mm/s, IP65
High Speed Electric Rotary Actuators, widely used in automation
field. electric rotary actuator, have other name, linear actuator,
electric actuator, electric pistion, electric motor...
Our factory is an expert in linear motion field, many products for
you choose, like linear actuator, electric cylinder, ball screw...
For example: linear actuator
Furniture linear actuators
Industrial linear actuators
Solar tracker linear actuators
To best serve you and to identify the most appropriate contact for
your needs, please inform us your requirements on linear actuator.
Specification of Mini Linear Actuator
| Item name | Mini Linear Actuator |
| Max. stroke | 600MM |
| Max. Static load | 2000N |
| Max. Dynamic load | 1200N |
| Operation Speed | 5mm/s/1200n
7mm/s/1000n |
| Input Signal | 3.3VDC, 5VDC |
| Position Detection | Potentiometer |
| Motor | Brushed DC motor |
| Degree of Protection | IP65 |
| Screw Type |
Trapezoidal screw |
| Power Input | 48V/36V/24V/12V |
| Self-locking ability | YES |
| Operating temperature | -35℃~65℃ |
| Optional 1 | Installation size |
Compact High Speed Linear Actuator 12v Electric Rotary Actuator
Small 50mm 200N
Stroke:
The amount of travel available in the product.
Installation Length:
From center of mounting to center of mounting point for the
product. Typically extended or compressed length specified.
Features of Mini Linear Actuator:
- Compact size
- Lead screw or ball screw (optional)
- Rugged piston, anti-rotation feature
- Low maintenance
- Customizable
- Waterproof mini linear actuator
- Long life span
Below you can see the correlation between STROKE and LOAD of Mini
LINEAR ACTUATOR.
Stroke Range
(mm) | Max Load (Newton) |
| 501-600 | 100 |
| 401-500 | 200 |
| 301-400 | 400 |
| 201-300 | 1000 |
| 30-200 | 1200 |
Picture of Mini Linear Actuator
Newton (N) to Pound (lbs)
| Newton | 1200N | 1000N | 800N | 500N | 200N | 100N |
| LBS | 264 | 220 | 176 | 110 | 44 | 22 |
Compact High Speed Linear Actuator 12v Electric Rotary Actuator
Small 50mm 200N
Linear Actuator Without Potentiometer
For stroke length below 12’’ (300mm)
A = Stroke Length +4.2’’(105mm)
B = Stroke Length X2 + 4.2’’(105mm)
For stroke length between 12’’-20’’ (300-500mm)
A = Stroke Length +4.8’’(120mm)
B = Stroke Length X 2 +4.8’’(120mm)
For stroke length between 20’’-24’’ (500-600mm)
A = Stroke Length +5.2’’(130mm)
B = Stroke Length X 2 +5.2’’(130mm)
Linear Actuator With Potentiometer
For stroke length below 12’’ (300mm)
A = Stroke Length +5.4’’(135mm)
B = Stroke Length X2 + 5.4’’(135mm)
For stroke length between 12’’-20’’ (300-500mm)
A = Stroke Length +6’’(150mm)
B = Stroke Length X 2 +6’’(150mm)
For stroke length between 20’’-24’’ (500-600mm)
A = Stroke Length +6.4’’(160mm)
B = Stroke Length X 2 +6.4’’(160mm)
The more we understand your application, the more suitable our
offer would be.
Please fill the table below as much as you could.
Some modification might be needed to the actuator so as to ensure
its adaptability
and durability catering for various uses.
We will offer detailed drawing and quotation after your reply.
| Key Spec. | Client's requirements A | |
| |
| stroke | | mm |
| retracted length | | mm (or not critical) => from front mounting hole to rear hole |
| voltage | | v dc (12v, 24v) |
| load capacity | | n (remark: 10 newton =1 kg) |
| Push or Pull | | Using pull force or push force? Both? |
| Constant tension | | Would there be constant tension to piston rod? |
| Constant pressure | | Would there be constant pressure to piston rod? |
| speed | | mm/s |
| working frequency | | estimated cycles per day |
| working environment | | application |
| | ℃ max temperature? |
| | ℃ min temperature? |
| | dripping water/ spraying water/ immersion/ high humidity |
| | any corrosive substance? |
| | impact? bumpy? |
| | any side force on piston rod? |
| | synch (two or more actuators working together) ? |
| limit switches | | limit switches (end stop) |
| signal feedback | | potentiometer/ hall sensor/ no need |
| Other requirements | | please describe |
| Quantity | | pieces |
| Drawing No. | | x |
| Unit Price | | x |
| Lead Time | | x |
| Shipping cost | | x |
Quality Without Question
We attention to quality is embedded into our culture. It’s just the
way we work.
First, we make sure all employees have the training and tools to
take individual responsibility for quality and to produce superior
results.
We make sure we are professional in linear actuator field.
Then, we use QA/QC processes to offer a truly comprehensive
approach — all focused on identifying and eliminating potential
issues of linear actuator products before they become a costly
reality..
WARRANTY OF LINEAR ACTUATOR
We guarantee that all products (LINEAR ACTUATOR) you receive will
be brand new, and have been thoroughly tested for defect and
performance before being shipped to you. At our company we put our
products to the test, stressing their performance in heat, cold,
liquid, and under heavy loads and high duty cycles. The
specifications listed on our products aren't just approximations;
they're backed up by hours and days of testing. We're so confident
in our actuators quality, performance, and endurance, that we
proudly offer the industry leading 12 month warranty.
All linear actuators produced and sold by our company are covered
by our comprehensive 12 month warranty against defect or flaw.
If we sell you a product, and it stops working before 12 month
pass, we will replace it free of charge.
However, the product has to only have been used within its rated
parameters and environment conditions.
We are here to help you with any question on linear actuators /
electric cylinders.
We can quickly help you find the right information or solution to
your needs.
CALL US AT +86 18762658863
FIND US IN WUXI CITY, CHINA
